Side skirt/fender vent gap

[E404]

Hey guys, just got my car back from the auto shop after the rebar incident! Some issues I noticed that wasn’t there before bringing them the car and would like to fix it myself since they’ve already gone above and beyond on stuff I requested.

How do I get rid of this monster gap/twist?

 

[type_ramen]

unless you're comfortable taking the body panels yourself, you gonna have to ask if they could assist you with taking it off, which will probably involve a lot of fasteners, screws, and joints that goes on so tight, that it will make you squeamish if pulling too hard.

 

[boosted180sx]

There’s two screws on that end. You might be missing one maybe.

 

[123sillyboy123]

Hey guys, just got my car back from the auto shop after the rebar incident! Some issues I noticed that wasn’t there before bringing them the car and would like to fix it myself since they’ve already gone above and beyond on stuff I requested.

How do I get rid of this monster gap/twist?

I have same gap but at the rear fender, it is one or two of the clip there aren't going in all the way and hence not holding up ur side rocker panel properly.
you need to slide the rocker panel off the car, align all clip , there are like 8 or so. And slide it back on.
It is not hard but u do need to know what you are doing.

 

[NHCivicGuy]

I would honestly make the repair shop handle this, since it sound like it may have been touched by them or the accident. It should not be on you for this.

 

[E404]

This is months ago, I’ve since had this resolved.

 

[123sillyboy123]

This is months ago, I’ve since had this resolved.

How did u end up pushing it back??

Sponsored