accordingtocivic
Senior Member
- Joined
- Jan 12, 2017
- Threads
- 6
- Messages
- 56
- Reaction score
- 20
- Location
- Wisconsin
- Vehicle(s)
- 2017 Honda Civic Touring
- Thread starter
- #1
For those of you who have installed a subwoofer in your car, regardless of trim, how did you go about routing the power wire from the battery to the sub (if it's a powered sub) or the amp? I'm planning on feeding it through the grommet located on the left side of the driver area right behind the trunk latch. Besides removing that first panel along the driver seat, has anyone removed the other piece between the driver and passenger doors, as well as by the back seats and the trunk? If so, how? I haven't been able to figure out a safe/easy/smart way of removing those parts to ensure the wire will sit okay.
Pictures would be much appreciated for this. Thanks!
EDIT: Here are some images of what I'm trying to describe, if that helps:
Trim/panel on driver's seat.
Trim section between driver door and passenger door.
Trim section next to/behind rear seats leading to trunk.
Pictures would be much appreciated for this. Thanks!
EDIT: Here are some images of what I'm trying to describe, if that helps:
Trim/panel on driver's seat.
Trim section between driver door and passenger door.
Trim section next to/behind rear seats leading to trunk.
Last edited: