Rev9 Intercooler Civic SI Install Review

[SiR_91]

Does anyone know what aftermarket pipes work with the rev9 intercooler? Would like to upgrade those when I do the intercooler. Doesn't have to be name brand as long as it's reliable and not going to fall apart or leak in a couple of days.

Sponsored

 

[du ma may]

Was close in buying the rev9 but f it bought the prl.

 

[salik990]

Does anyone know what aftermarket pipes work with the rev9 intercooler? Would like to upgrade those when I do the intercooler. Doesn't have to be name brand as long as it's reliable and not going to fall apart or leak in a couple of days.

check their website.

 

[arnoldo]

Does anyone know what aftermarket pipes work with the rev9 intercooler? Would like to upgrade those when I do the intercooler. Doesn't have to be name brand as long as it's reliable and not going to fall apart or leak in a couple of days.

There is no information mention compatibility with after market charge pipe. I checked Rev9 website and the IC cost USD 450. I'd suggest BMS Intercooler if you are in the US. They are currently do promotion and the IC only cost USD 299.

 

[Ducota]

There is no information mention compatibility with after market charge pipe. I checked Rev9 website and the IC cost USD 450. I'd suggest BMS Intercooler if you are in the US. They are currently do promotion and the IC only cost USD 299.

Plus free shipping lol ?

 

[ilipac]

Rev9 intercooler results
With PRL Cobra
IATs are 5-10 over ambient!

 

[SiR_91]

Really stupid question here. Is the intercooler on all the 10th gens the same across every model except the type r? Or is the si intercooler a different size as well as different years?

 

[BanquoX]

Really stupid question here. Is the intercooler on all the 10th gens the same across every model except the type r? Or is the si intercooler a different size as well as different years?

All the 1.5t intercooler on the civic are identical

 

[SiR_91]

All the 1.5t intercooler on the civic are identical

Thank you very much. That is what I thought. Just wanted to make sure.

 

[SiR_91]

Does anyone by chance happen to know the diameter of the stock piping?

 

[SiR_91]

Change those pesky HC pipes i just installed the CNT pipes what a difference 78/89 degrees 3% humidity went from 123/124 degrees stationary to 88/89 degrees same position. A 5min drive seen my IAT temp hit 79/81 Thats without the Bumper 44/50 mph straight run tbc

Where did you get the cnt pipes? And would they fit the si?

 

[salik990]

Bms is definitely much thicker. Ill measure it when I get time.

@arnoldo u were saying BMS and Rev9 size are same but here you can see its not same size at all.

 

[arnoldo]

@arnoldo u were saying BMS and Rev9 size are same but here you can see its not same size at all.

Why don’t you buy BMS & measure it yourself then? I know for sure it has the same measurement as Rev9. I can make the IC look as big as the image at the same camera angle.

 

[salik990]

Why don’t you buy BMS & measure it yourself then? I know for sure it has the same measurement as Rev9. I can make the IC look as big as the image at the same camera angle.

i dont need it, just telling you the size of both are not same at all!!

 

[BanquoX]

Why don’t you buy BMS & measure it yourself then? I know for sure it has the same measurement as Rev9. I can make the IC look as big as the image at the same camera angle.

I've already done this. The BMS intercooler is 134.45 mm thick while the rev9 offering is 90mm thick. I've held both in my hands and the rev9 feels like a cheap piece of shit compared. I'm sure the rev9 works fine. But it is 100% a completely different product.

Sponsored