Rev9 Intercooler Civic SI Install Review

[saiko21]

170F? are you talking about IAT?

Sponsored

 

[Rustlinjimmies]

Install was straight forward unfortunately I forgot to log my IAT before but now I’m at 170F area

170 on iat or iat2?

 

[salik990]

i see the differences of IAT (post intercooler) by over 10c, if the ambient temp is 32c i would see 40-42c IAT on full WOT and in traffic it would be around 45-50c.

 

[du ma may]

worth the money?

 

[Jtbuilds]

i see the differences of IAT (post intercooler) by over 10c, if the ambient temp is 32c i would see 40-42c IAT on full WOT and in traffic it would be around 45-50c.

 

[Boostpyro]

Does anyone have Ambient, IAT, and IAT2 figures for this to see how efficient it is at cooling?

 

[saiko21]

I still feel this is a Chinese knock off intercooler.

 

[Jtbuilds]

Does anyone have Ambient, IAT, and IAT2 figures for this to see how efficient it is at cooling?

About 30 minutes of driving. Rev9 intercooler also have prl frontpipe downpipe if it makes a difference. It is 73F/23c degrees in Dallas.

 

[Jtbuilds]

About 30 minutes of driving. Rev9 intercooler also have prl frontpipe downpipe if it makes a difference. It is 73F/23c degrees in Dallas.

Sorry for the blurry pics. Previous picture taken on highway driving.
Here’s the latest idling in parking lot

 

[Rustlinjimmies]

Sorry for the blurry pics. Previous picture taken on highway driving.
Here’s the latest idling in parking lot

Actually pretty good numbers

Found someone near me selling a prl intercooler with the charge pipes so might just pull the trigger on it and get it

 

[Jtbuilds]

Actually pretty good numbers

Found someone near me selling a prl intercooler with the charge pipes so might just pull the trigger on it and get it

Post your numbers before and after the charge pipes if you can.
Rev9 intercooler Build quality seams good. Very heavy compared to stock intercooler as expected. Easy one to one install.

 

[Jtbuilds]

170 on iat or iat2?

Sorry kinda new to intercoolers and turbos in general . Starting to figure things out I’ve posted the numbers recently check the latest post

 

[du ma may]

whats the temp when doing a pull in 3rd gear?

 

[Jtbuilds]

whats the temp when doing a pull in 3rd gear?

Won’t send it to your disrespecting my mamma. Lol like your screen name. I’ll post some in a few hours on 3rd gear pull .

 

[Rustlinjimmies]

Post your numbers before and after the charge pipes if you can.
Rev9 intercooler Build quality seams good. Very heavy compared to stock intercooler as expected. Easy one to one install.

Plan too, I’ll get a reading on my way home before doing it and then after should be done this weekend I hope

Sponsored