Request - How to adjust LED headlight

[Donkeyhotay123]

@ITGuyLevi - which screws do you turn? Wasn't able to tell from your photos.

I gotcha fam. Its not really a "screw" as it is a gear. Stick your p2 driver into the gear from the two plastic wings

Clockwise to raise the beam
Counter-clock to lower it

Clock up/count down is how i remember it.

 

[Israel]

Likely the entire reflector housing. It's usually a little ball joint under the entire inner housing that pushes it up. Keep in mind that adjusting them too far will pop the ball joint and your headlights will be fucked until you open them up.

That happen to me , i couldnt bring up or raise the Aim no more I adjust them too far counter wise

 

[Israel]

I gotcha fam. Its not really a "screw" as it is a gear. Stick your p2 driver into the gear from the two plastic wings

Clockwise to raise the beam
Counter-clock to lower it

Clock up/count down is how i remember it.

You it can be used a Mm wrench instead of a screwdriver?

 

[ITGuyLevi]

You it can be used a Mm wrench instead of a screwdriver?

I can't remember what size but you definitely can use a wrench (or socket if you are lazy like me).

Sponsored