Remove Instrument Cluster Visor

arhncmh

It's not my fault, really.
Joined
Jan 9, 2017
Threads
6
Messages
138
Reaction score
60
Location
Harrisburg, PA
Vehicle(s)
2017 Civic LX Sedan CVT
Country flag
Trying to figure this out.

Goal: Find and eliminate dashboard rattle on far left side that occurs during cold weather.

Based on what I'm seeing, I need to first remove the visor over the instrument cluster. Once this is off, I'll have access to the top of the dashboard and the suspected rattle area.

I've seen lots of information on these Forums regarding DIY work, just not this specific location.

I have also seen some helpful YouTube videos, again, not any imagery of how to remove the instrument cluster visor.

I've spent some time looking and pulling and looking around for the locations of the clips/fasteners. I managed to get the part closest to the windshield free so I could look underneath. There are two clips half-way to the windshield, but the bigger is held fast in a manner I haven't figured out enough to pull hard and remove it.
Sponsored

 


 


Top