Rear LED Lights

[Andy123az]

I don't know, it hyperflashed

I bought ones from the same company for my sedan and I never got any hyper flashing.

Sponsored

 

[sniper]

I bought ones from the same company for my sedan and I never got any hyper flashing.

Did you change the front too?

 

[Andy123az]

Did you change the front too?

Nope. Front bulbs are oem. Changing all 4 will give you hyper flash.

 

[sniper]

Nope. Front bulbs are oem. Changing all 4 will give you hyper flash.

Yep, I guess having more load on your front keeps the circuit okay, but I already have LEDs on the front with the touring, oh well, resistors did the trick.

I do like the bulbs, thanks for the recommendation!

 

[RBorden629]

Just installed the following:
Led Brake light:

www.amazon.com/gp/aw/d/B00LATB2IE/ref=yo_ii_img?ie=UTF8&psc=1

LED rear Turn Signals:

https://www.amazon.com/gp/aw/d/B01LWSFFF5/ref=yo_ii_img?ie=UTF8&psc=1

Reverse Lights:

https://www.amazon.com/gp/aw/d/B01LX4FMD1/ref=ya_st_dp_summary

Evaluations:
Red LED ok, I have these. Ordered these other ones
https://www.amazon.com/gp/aw/d/B00HWS7XGW/ref=ya_st_dp_summary
They will be delivered tomorrow. I think they will be much brighter (phillips).

Yellow LED wonderful very bright!

White (reverse) Very very bright! The only issue is the led bulb in socket is not that that tight. We will see.

 

[jjccrv]

Had a brake light burn out on my 2016 ex-t coupe. Went to the auto parts store before I removed it and they gave me the wrong bulb....... pulled it and found it was a round socket. Went to a different parts store, looked the car up, gave him the same number as the other one, which was wrong. Having the bulb with me, we determined it was a 1156. The 1157 has 2 elements and the 1156 has 1. Replaced it and it works fine. Ordered 2 LED bulbs which will arrive tomorrow, we'll see if I like them. By the way, the 2 screws on each side were hell to loosen, finally used some wd-40 let it sit a while and then had to use a pliers to turn the screwdriver to loosen them. The assembly pulls out very easily.

 

[saminder]

Just installed the following:
Led Brake light:

www.amazon.com/gp/aw/d/B00LATB2IE/ref=yo_ii_img?ie=UTF8&psc=1

LED rear Turn Signals:

https://www.amazon.com/gp/aw/d/B01LWSFFF5/ref=yo_ii_img?ie=UTF8&psc=1

Reverse Lights:

https://www.amazon.com/gp/aw/d/B01LX4FMD1/ref=ya_st_dp_summary

Evaluations:
Red LED ok, I have these. Ordered these other ones
https://www.amazon.com/gp/aw/d/B00HWS7XGW/ref=ya_st_dp_summary
They will be delivered tomorrow. I think they will be much brighter (phillips).

Yellow LED wonderful very bright!

White (reverse) Very very bright! The only issue is the led bulb in socket is not that that tight. We will see.

Does the LED turn signals hyperblink? Does it come with load resistor that connects separately or the resistors are inbuilt in the led bulb?

 

[jjccrv]

The Canadian lights might be different than the American...........

 

[saminder]

The Canadian lights might be different than the American...........

I don't think so. I have bought all the led lights for my civic from USA and all worked well. The lights from hatchback and sedan could be different though because of the models.

 

[RBorden629]

Does the LED turn signals hyperblink? Does it come with load resistor that connects separately or the resistors are inbuilt in the led bulb?

It has a canbus built in, NO hyper flash. Works great!

 

[Syntek]

Be careful with those amber lights guys. I read at least 10 reviews where the bulbs overheat and melt the sockets or blow a fuse.

These:
https://www.amazon.com/LUYED-Lumens...e_desktop?_encoding=UTF8&psc=1&ref_=yo_ii_img

 

[mokylim]

Had a brake light burn out on my 2016 ex-t coupe. Went to the auto parts store before I removed it and they gave me the wrong bulb....... pulled it and found it was a round socket. Went to a different parts store, looked the car up, gave him the same number as the other one, which was wrong. Having the bulb with me, we determined it was a 1156. The 1157 has 2 elements and the 1156 has 1. Replaced it and it works fine. Ordered 2 LED bulbs which will arrive tomorrow, we'll see if I like them. By the way, the 2 screws on each side were hell to loosen, finally used some wd-40 let it sit a while and then had to use a pliers to turn the screwdriver to loosen them. The assembly pulls out very easily.

Wait what?!! I thought for sure the bulb on the brake light on the coupe are 1157's? Ordered one and theyre on the way

 

[jjccrv]

The driver side rear brake light actually had 1156 stamped on it when I pulled it

 

[CosmicTouring]

Installed my LED Turn signals using Zevo Amber bulbs and low heat resistor from DIY: Car Modz. One resistor will work for both front and back at same time each side.

I have the Touring and all my lights inside and outside are LEDs except for the sun visor vanity lights.

http://www.civicx.com/threads/led-t...esistors-w-oem-style-harness-all-trims.10290/

 

[RBorden629]

Does the LED turn signals hyperblink? Does it come with load resistor that connects separately or the resistors are inbuilt in the led bulb?

Not sure if they are built in, But No Hyper flash. But not I have a Sport Touring so I have Front LED Turn, Day Light Headlights, LED Headlights and Led High Beams. So I guess on the turn signal circuit is just the Two OEM rear LED's.

Sponsored