Rear Diffuser and pipes

[enishi]

Do you think this is worth it?

https://www.ebay.com/itm/For-2016-1...m=192240421232&_trksid=p2047675.c100005.m1851

Sponsored

 

[ramnj]

Looks similar to the one I got but without the pipes. Took it to a shop and they custom finished it. I like it.

 

[CivicChina]

Looks similar to the one I got but without the pipes. Took it to a shop and they custom finished it. I like it.

this one looks much better

 

[MyFirstHonda]

I think the design looks good.

 

[enishi]

Looks similar to the one I got but without the pipes. Took it to a shop and they custom finished it. I like it.

Do your middle of your diffuser and bumper stick out a bit? The one I got has the led in the center but since it doesn't have much room between the diffuser and the metal part of the car it actually bulge out and not fit so well.

 

[ramnj]

I had to trim some plastic on the inside to make it fit, but was very little material that had to be removed.

 

[ramnj]

 

[xaviersayys]

Looks good! I've been looking for a diffuser that looks as flush as yours, but without the LED. Also, did they have to cut any of the metal to make room for the pipes?

 

[ramnj]

...did they have to cut any of the metal to make room for the pipes?

Yes. You have to cut the metal in order to get the same look. Not a lot...just enough for the tires to clear.

 

[socal818]

What size exhaust tips did you use? 3.5” outlet? Also did you connect the led?

 

[ramnj]

I got 3.5" x 2.5", 13" long from Amazon. I haven't connected the light and not sure I will. Got some black vinyl and gonna cover the lens for now. There's another diffuser without the light that I have my eye on but haven't decided if I'm gonna get it yet.

 

[socal818]

I got 3.5" x 2.5", 13" long from Amazon. I haven't connected the light and not sure I will. Got some black vinyl and gonna cover the lens for now. There's another diffuser without the light that I have my eye on but haven't decided if I'm gonna get it yet.

Do you have a link for the other without the light? I was also looking at this one...

 

[ramnj]

That's the one I'm looking at.

 

[socal818]

That's the one I'm looking at.

The only thing I’m not sure about on that one is the gaps...looks like it sticks out further than the others.

 

[xaviersayys]

The only thing I’m not sure about on that one is the gaps...looks like it sticks out further than the others.

That’s mainly why I haven’t pulled the trigger on it. Ugh. I don’t want the LED light but all the plain ones look like they stick out soooo far. Still haven’t found a flush one yet.

Sponsored