RAYS CTR FK8 Spec Wheel Options

[Froggie3kb]

Thanks again @jonnys_honda for doing all of this leg work for us...

Sponsored

 

[Scrapdog]

If they fit they have wider and lower offsets, I don't know how big of a wheel fits so I went conservative.
https://www.rayswheels.co.jp/products/wheel.php?lang=en&wheel=ZE40

After seeing these wheels, i have changed my mind , the ZE 40's , hopefully they come out with a 20

 

[drtye]

After seeing these wheels, i have changed my mind , the ZE 40's , hopefully they come out with a 20

I'd rock em in 19, wouldn't even care.

 

[CTR_Gavin]

Come on Johnny! Post the only wheel that matters for this car!!!!

 

[jonnys_honda]

Come on Johnny! Post the only wheel that matters for this car!!!!

i want to so bad...

 

[jonnys_honda]

Sorry all had a few hiccups. Had to remove mention of the Rays vendor. Can't mention them until they become a vendor of the site. Will continue posting specs for Rays wheels

 

[jonnys_honda]

If they fit they have wider and lower offsets, I don't know how big of a wheel fits so I went conservative.
https://www.rayswheels.co.jp/products/wheel.php?lang=en&wheel=ZE40

Sorry late to answering this....

The only wheel spec that works with the CTR is the one you mentioned at 19x8.5 +35

The others are too aggressive unfortunately. But I'm sure it'll be in the works.

ZE40 Specs below:

 

[y4ngel]

Come on Johnny! Post the only wheel that matters for this car!!!!

TE37s or CE28s?

 

[CTR_Gavin]

TE37s or CE28s?

CE's

 

[y4ngel]

CE's

Too bad they aren't going to come in 19s At least not for a while, here's to hoping I am wrong. I would buy some bronze CE28s in 19 right NOW!

 

[noobsteak]

Not sure if the CTR's wheel wells are the same dimension as the hatchback.. If they are the same, anything over +40 offset will make your wheels sunken in the guard and anything under +30 will make them poke off the guard (pretty much for 8.5-9.5 width).

But I guess they should be a little different since the CTR utilizes 5*120 hub.

 

[jonnys_honda]

Not sure if the CTR's wheel wells are the same dimension as the hatchback.. If they are the same, anything over +40 offset will make your wheels sunken in the guard and anything under +30 will make them poke off the guard (pretty much for 8.5-9.5 width).

But I guess they should be a little different since the CTR utilizes 5*120 hub.

I've personally done test fitting with my Type R. Everything I list in this thread will fit

 

[jonnys_honda]

Adding CE28 today... stay tuned!

 

[CTR_Gavin]

Adding CE28 today... stay tuned!

It's about tiiiiiiiiiiiiiiiiiiiime!!

 

[GSquared]

Adding CE28 today... stay tuned!

The east coast is in for some time traveling!

Sponsored