Rampage 3.5″ MAF Housing for PRL HVI

[xdecemberguy]

Is their anything stopping me from modifying the stock airbox from using this? Spending all that extra money on the HVI from PRL just doesn't add really that much benefit to me for the price. Almost every test indicates that the stock airbox is superior and does a fantastic job. I would rather spend my money elsewhere. I just added the Hiflo filer and it sounds great with just the PRL intake hose. Let me know your thoughts.

Sponsored

 

[FK8_K20c1]

Is their anything stopping me from modifying the stock airbox from using this? Spending all that extra money on the HVI from PRL just doesn't add really that much benefit to me for the price. Almost every test indicates that the stock airbox is superior and does a fantastic job. I would rather spend my money elsewhere. I just added the Hiflo filer and it sounds great with just the PRL intake hose. Let me know your thoughts.

The OEM MAF housing size becomes a restriction when you push big numbers. It maxes out the voltage. Meaning the ECU cannot see or meter the air correctly. If it doest meter the air correctly it wont add the correct fuel. The PRL HVI has a slightly bigger housing compared to OEM that alone give you some room.

 

[seselectronics]

Is their anything stopping me from modifying the stock airbox from using this? Spending all that extra money on the HVI from PRL just doesn't add really that much benefit to me for the price. Almost every test indicates that the stock airbox is superior and does a fantastic job. I would rather spend my money elsewhere. I just added the Hiflo filer and it sounds great with just the PRL intake hose. Let me know your thoughts.

That depends of your goals , if you’re FBO, stock or don’t planing to go over 400 whp you will be fine , also if is just for noise just keep the oem air box , I had mine just heat wrapped and I got 412whp 425 wtq but it was maxed out , with another intake with larger maf housing I can get more , @kc20c1 he already explained the reasons why .

 

[seselectronics]

Sorry @FK8_K20c1 , lol ? I tagged you wrong up

 

[QuasarMotors]

Seems like it would be very difficult to modify the stock box to adapt the larger MAF housing. I looked into this very quickly as I was thinking the same thing but the housing on the stock box is fully built into it.

 

[xdecemberguy]

If someone could just 3D print a basic top with the 3.5 inch opening in the side and sell them that would be awesome.

 

[Benb870]

Here's mine i had anodized red. Rampage fab.

 

[Coqui]

Bought a MAF housing, got a turbo included ?

 

[fk8mike]

Bought a MAF housing, got a turbo included ?

lucky didn't have this me??

 

[seselectronics]

Seems like it would be very difficult to modify the stock box to adapt the larger MAF housing. I looked into this very quickly as I was thinking the same thing but the housing on the stock box is fully built into it.

Uyyy that’s going to be veryyy difficult ?, I’m the guy who used to try a lot of mods ,and I’ve done a lot of crazy mods but I don’t think that’s a good idea, is going to be easier to try in a different intake like the Mishimoto maybe?

 

[seselectronics]

Here's mine i had anodized red. Rampage fab.

I got mine this Monday , I decided to go with raw aluminum, because my intention from
the beginning was heat wrapped the maf and the box , here some pics

 

[seselectronics]

After run some testing I’ve noticed afr swing on 5th gear from 5500rpm to 7200 rpm , I need to keep correcting the maf calibration , have you checked yours ?

 

[Night Fury]

I got mine this Monday , I decided to go with raw aluminum, because my intention from
the beginning was heat wrapped the maf and the box , here some pics

That wrap looks awesome, what's the material used, do you mind to share? Thanks.

 

[seselectronics]

That wrap looks awesome, what's the material used, do you mind to share? Thanks.

Yes that’s the best material at the moment I’ve tested so far , and is sticky back , the glue is very strong and holds high temps

Design Engineering 050502 Floor &... https://www.amazon.com/dp/B000CEM3O0?ref=ppx_pop_mob_ap_share

 

[Semin]

If someone could just 3D print a basic top with the 3.5 inch opening in the side and sell them that would be awesome.

Yea great idea , it will be very usefull for the people who lives outside USA , because shipping and custom taxes makes these items price very high.Please help us

Sponsored