Push Button Start Conversion

[Shankmeyster]

Has anyone done it yet? I see plenty of kits but figured if anyone is going to do it it should be a clean install, not a "I have to put the key in before I push the button" kind of install because, let's face it, what's the point of that? How hard do you think it would be to convert over to stock system on the upper trims? I searched and didn't see a thread already so I guess we'll start here.

Sponsored

 

[Froz3nTundra]

Based on what I've looked at for Radio/climate/heated seats for upgrading from LX trim to EXL trim, you're probably not going to want to deal with it. It's all tied together and controlled by the interior computer I believe, push button start is going to be tied into a bunch of stuff.

 

[Shankmeyster]

I see a separate ECU for the push button anyway. https://estore.honda.com/honda/part...7-civic-5-sport-touring-cvt&sn=&b=B++1380&dl=

and the switch for the start stop. https://estore.honda.com/honda/part...7-civic-5-sport-touring-cvt&sn=&b=B++1110&dl=

Sponsored