LOL where did you get that? From OEM piece? How is it attached?Going for a "stock" look
EbayLOL where did you get that? From OEM piece? How is it attached?
Haha niceGoing for a "stock" look
Mine did after maybe 1.5 years. Funnily, it happened right after I got a slow flat and left it in the driveway for a week. Tow truck got here and ho-ho we can't take off the parking brake and nobodys got cables, time to put er on four dollies.See you have a duralast battery. Your stock battery already go dead?
Our winter beater needed a battery so I slapped the Honda battery in that and upgraded mine to AGM and 1 size bigger.Haha nice
See you have a duralast battery. Your stock battery already go dead?
No HVI versions of the blems available?We have had a customer confirm fitment with the Gruppe M intake system with modification of the inlet hose, but we can pretty much guarantee that this will not fit any other intake systems. Our kits have two hose options; stock air box and HVI, both of different angle and length. Unless the MAF Housing is similar diameter and location to either our HVI or the stock air box, the inlet pipe will not fit.
Keep an eye on our clearance section on the website to see when we may have blemished items available.No HVI versions of the blems available?
I think he’s asking about the blemished inlet tube w/ the HVI tube. Which correct me if I’m wrong, is currently available on your site.Keep an eye on our clearance section on the website to see when we may have blemished items available.
I emailed them about it a couple of days ago. It is fixed now and I've ordered a HVI blemished version.No HVI versions of the blems available?
Which dealers?Our Titanium Turbocharger Inlet Pipe Upgrade Kits for the 2017+ FK8 Honda Civic Type-R are now available at select stocking PRL Motorsports Dealers!
Current ETA for our next bulk batch of Inlet Pipe Kits to be available is August and will be available directly through PRL Motorsports and/or any Authorized Dealer. Please keep an eye out on our website, social media accounts, CivicX forum and mailing list for updates!
That was an actual issue on their end? I got my HVI from the first batch, and when installing it, the silicone hose just never goes on as far as I see everyone else's. I've done everything I can, and even extra muscle to help me push it onto the inlet pipe, but still nothing. Did a couple other tries since I had to remove that piping when I installed their charge pipes, and I still haven't been able to slide that silicone over as far as most peoples. Figured it must be me. Tried lubing it as well. Would be nice if I got another one for free. Maybe it'll fit better whenever I get the inlet by PRL. I have all their products but that.Yup, that HVI hose needs some redesign. Perhaps I received a faulty one. Although, after sending them photos and such I was told it was “normal”. I also ran into the issue where the silicone hose included with their HVI was a bit on the short side. My mechanic and I attempted all their “tips and tricks” such as loosening and re-fitting different areas while installing to no avail. My only gripe was that upon several complaints at no point did anyone in their team volunteer to send me a replacement or directly reach out to me. I didn’t really push the issue since I was getting a new silicone hose with the TIP. Nice catch btw!