Minkim1212
Member
- First Name
- Min
- Joined
- Jun 25, 2019
- Threads
- 0
- Messages
- 7
- Reaction score
- 0
- Location
- Tennesse
- Vehicle(s)
- FK8
Thanks!Supposed to be today then Sep 30.
Sponsored
Thanks!Supposed to be today then Sep 30.
I’m also wondering if it’s loud under lower loads or just when pushing the throttle? My Mishi is pretty quiet and you can only hear it under heavy throttle. Even at that I would not say it’s loud, just audible. Breaking necks sounds kinda loud. Looking forward to installing this thing.
Here is a clips from both inside the car and outside the car. Both the intake and BOV sound louder than stock. I can’t really compare it to other intakes.Is it that loud? Doesnt sound too loud from the small amount of videos I've seen
So you also have an aftermarket BOV installed that is contributing to the sound on those clips? Just want to be clear that the sound is not all due to the HVIS? I didn’t see a BOV in the engine bay pick, so just want to confirm. Thanks!Here is a clips from both inside the car and outside the car. Both the intake and BOV sound louder than stock. I can’t really compare it to other intakes.
Top picture is after rotation?I have had the intake since the first batch. I installed it and was worried about the clearance so i did not rotate one of the connections all the way as i was scared to break something. BUT i highly suggest you give it a shot. You will not break anything, a little force may be needed but yesterday i popped my hood to make sure everything was fine since its been a good month or so since the intake has been installed. I noticed that the hose was rubbing on my hood and went ahead and rotated it. I dont know why i didnt try it before but i want you guys to go ahead and try it. NOW i dont want you guys to think i am bashing on PRL or anything. This is 100% user error and pxssyness. But here are before and after pictures!
Top is before and bottom picture is after rotation. You can see that the hose does not sit as high like in the first picture.Top picture is after rotation?
Top is before and bottom picture is after rotation. You can see that the hose does not sit as high like in the first picture.
No after market BOV! Everything under the hood is stock except for PRL intake!So you also have an aftermarket BOV installed that is contributing to the sound on those clips? Just want to be clear that the sound is not all due to the HVIS? I didn’t see a BOV in the engine bay pick, so just want to confirm. Thanks!