Post Your Pressure Washer Setup

[Thatguyraw]

Kranzle 1322 TS Pressure Washer
OG Kranzle Stainless Steel Shelf
OG Spec Mosmatic Wand/Gun and Holder
Cox Reel
OG Spec Cox Reel Mount
MTM-hydro Kobra Jet 100ft Hole
MTM-hydro PF22.2 Foam Cannon
D.I Rinse Filter system
Flexzilla Garden Holes
MTM-Hydro Fittings

 

[Fit2Hatch]

Keep an eye on your 1322 transmission/motor joint. Reported to be fairly problematic among this model. Mine developed leakage and I was able to convinced distributor to send me a new transmission housing to make the fix, they send a bottle of oil per my request for free as well. Distributor then, refer another Porsche owner having the same problem for me to help him fix the same issue.

Another problem with the "OG" Kobra Jet hose is the fittings. They are not stainless, it will rust and cause problems if owner not knowing nor paying attention.

"OG" company is a fairly expensive one stop shop. I am a capable fabricator, so to keep more money in my pocket, I only bought the 1322 and Kobra Jet Hose. I made a dolly wagon out of 3/16" thick x 12" 304 , mounted on 2" roller casters. Total cost was under $75. The rest of the periphery eqipment I sourced over the web for best price. And came away very happy on the setup along with the money saved.

1322 is a nice quite pump. But do keep an eye on the bottom where transmission is jointed to motor housing.