Sport-injected
Senior Member
- First Name
- Scott
- Joined
- Jun 2, 2019
- Threads
- 121
- Messages
- 3,282
- Reaction score
- 4,882
- Location
- Central Jersey
- Website
- www.youtube.com
- Vehicle(s)
- 2019 Civic Si, 2006 Saab 9-3 Aero
- Build Thread
- Link
- Thread starter
- #1
Selling my Rv6 R365 drop-in turbo. Installed on car for a out 13,000 miles, a little over 1 year. Compressor outlet ported to 38mm to match the stock or 27won inlet pipe crossover port (33mm when new) Hot side is jethot coated. Zero issue with this turbo, no shaft play no oil leaks. Tuned on 93 octane, seen a max of 26psi. Always ran mobil 1 5w-30 oil. I don't beat on my car, drive like an old lady 95% of the time. Will come with the oil feed/return lines, will not have gaskets or hardware - a kit can be ordered from RV6 or from Honda.
Will ship on your dime. $900.
Jethot coating was $300.
Will open the outlet port to 45mm if you have the PRL inlet pipe for additional cost.
Will add more pictures tomorrow.
Will ship on your dime. $900.
Jethot coating was $300.
Will open the outlet port to 45mm if you have the PRL inlet pipe for additional cost.
Will add more pictures tomorrow.