Ordered a front splitter/lip - CT AutoParts (Aus)

[kaboom214]

Hey Guys,

I've just ordered this front lip/splitter from CT Auto Parts (Australia), has anyone on here purchased/installed this before?
Or even a 3 piece one before?
This is my first mod of hopefully many to my bone stock Civic RS

https://www.ctautoparts.com.au/prod...diffuser-for-2016-2018-honda-civic-sedan.html

Sponsored

 

[FoulMouthedCivic]

THAT IS BEAUTIFUL This is giving me ideas lol.

 

[HexSosa1]

Looking at a similar 3pc carbon fibre look splitter on amazon for my Touring sedan which is also 3pc so interested to hear how your install goes when you get it and on the car please update. THX

 

[kaboom214]

THAT IS BEAUTIFUL This is giving me ideas lol.

I'll be sure to take some pictures of it mounted

Looking at a similar 3pc carbon fibre look splitter on amazon for my Touring sedan which is also 3pc so interested to hear how your install goes when you get it and on the car please update. THX

Definitely will do! It's apparently arriving on Friday according to tracking info, so hoping to get it installed over the weekend

 

[maaaaackle]

Thats a nice piece.

 

[kaboom214]

So got it mounted last night after several hours, it shouldn't of taken that long but I was just being super careful and taking my time to get the bumper off and getting the holes measured right before I started drilling.
I do have to adjust some bolts on the front piece as it's not allowing the bumper to go on fully and line up as they're a tad too long, but I might be able to flip them around . So only about 50% of the clips are holding the bumper on at the moment, but it's sturdy enough to get me to work and home again today

 

[Adil]

Wow, looks amazing. I ordered one from E bay. Do you have to remove bumper to fit?

 

[kaboom214]

Wow, looks amazing. I ordered one from E bay. Do you have to remove bumper to fit?

Thanks! Yep I had to remove it. I also didn’t use the self tapping screws it came with, I went to the hardware store and got some nuts and bolts for a more solid fitment, didn’t want it coming off if I happen to scrape accidentally.
Just make sure they aren’t too long otherwise they hit on the plastic piece just under the intercooler and your bumper won’t line up properly when you put it back on (I made this mistake and had to get shorter bolts lol).

 

[Adil]

Thanks for the info. Looks really good, Enjoy! Hoping mine arrives soon.

Sponsored