Oil pressure / temp sensor wiring

[Coldpizza]

Hi everyone! I’m installing oil pressure and temp sensors, and was looking to see how folks have routed wiring through the firewall. I’m looking along the hood release cable and found it’s grommet, but was wondering if anyone else has found any solutions. Thanks in advance!

Sponsored

 

[metal_driver]

Mike, take a look at post #45 and #38 to see pics and a brief how to write up I did on installing an oil temp gauge - https://www.civicx.com/forum/threads/jeffs-build-for-occasional-light-track-use.51054/page-3

As far as oil pressure gauge there is some discussion here - https://www.civicx.com/forum/threads/monitoring-oil-temperature-and-oil-pressure.15074/page-2

 

[Coldpizza]

Mike, take a look at post #45 and #38 to see pics and a brief how to write up I did on installing an oil temp gauge - https://www.civicx.com/forum/threads/jeffs-build-for-occasional-light-track-use.51054/page-3

As far as oil pressure gauge there is some discussion here - https://www.civicx.com/forum/threads/monitoring-oil-temperature-and-oil-pressure.15074/page-2

this is perfect, thank you @metal_driver! I saw that one you used after I pulled the fender liner off to give it a go at the hood release grommet, I’ll give that a try!

Sponsored