SpinRush
Senior Member
- First Name
- Big Will
- Joined
- Oct 23, 2018
- Threads
- 28
- Messages
- 171
- Reaction score
- 131
- Location
- Japan
- Vehicle(s)
- FK8 ( Waiting )
- Thread starter
- #1
Just got my oil catch can today. This was an issue for a long time because most vendors are only making oil catch cans for LHD. Japan FK8 is RHD so a lot of companies I contacted had no response for me.
In Japan, we found that only Cusco has a 9mm oil catch can. There was another maker but the measurement for the tubing was 10mm. Luckily, a company called HPI has a carbon catch can with a 9mm adaptor. The design matches up with the Eventuri carbon CAI so that’s a plus.
Now the question is where to mount it. We are thinking to drill one hole on a mounting bracket. I’m going to share a few pics. The red circle in the picture is where we are thinking of drilling the hole.
What do you think?
In Japan, we found that only Cusco has a 9mm oil catch can. There was another maker but the measurement for the tubing was 10mm. Luckily, a company called HPI has a carbon catch can with a 9mm adaptor. The design matches up with the Eventuri carbon CAI so that’s a plus.
Now the question is where to mount it. We are thinking to drill one hole on a mounting bracket. I’m going to share a few pics. The red circle in the picture is where we are thinking of drilling the hole.
What do you think?