NSX Paint Correction + Ceramic Coating

[blueap2]

I performed a complete, 2-step paint correction on this beautiful New Formula Red NSX a few months ago and would like to share part of the process and end result with all of you.

The condition showed many years of improper wash/drying methods. Also came in with etched water spots on several panels, mostly on the hood. The following steps were performed to achieve an almost flawless result:

1. Decontamination wash with Obsessed Garage car shampoo through an MTM foam canon, pressurized by a Kranzle pump.
2. Chemical decontamination with CarPro Iron-X remover
3. Mechanical decontamination with Nano Autoscrub Fine grade sponge with Nano Glide as a lubrication agent
4. Compound with Jescar Compound and a combination of Meguiars Cutting Microfiber pads and Rupes Cutting Wool pads all with a Rupes LHR15MKii, Rupes LHR75e, and Rupes Nano Long-Neck
5. Finish polish with Meguiars M205 and a Rupes Yellow pad with a Rupes LHR15MKii, Rupes LHR75e, and Rupes Nano Long-Neck
6. Removed polish and oil residue with CarPro Eraser in preparation for Cquartz ceramic
7. Applied CarPro Cquartz to the entire vehicle.

Hope you enjoy the pictures. Feel free to ask questions and to communicate with me if you would like your car corrected in southern California.

I have more pictures on my instagram: nalgas_de_fierro.

Thanks!

 

[infiniteraiders]

Awesome job!

 

[blueap2]

Awesome job!

Thank you!

 

[dallasjhawk]

Awesome car, awesome work. Car show ready

Sponsored