Sport-injected... Build Thread

[Sport-injected]

The next next round of upgrades starting to accumulate...
Hasport upper motor mounts
Kz cmc
Comp clutch stage 2 on order
Waiting to pull the trigger for the latest drop-in turbo to be released.

Should be a productive winter

Sponsored

 

[Sport-injected]

Latest list of parts I'm hoarding

-Competition stage 2 clutch 22 lb flywheel
-kzcmc
-whiteline 27mm front swaybar kit
-magic rigid collar kit
-acuity shifter assembly
-half of the RV6 turbo( other half out for jethot coating)
-drob etune

Part on order
-rz crew intake manifold
-ultra racing from lower brace
-ultra racing 3 point subframe brace

Clutch/front sway/kzCmc/rigid collars will be installed by end of month, shifter should be installed this week, turbo will be installed as soon as I get housing back. The remaining parts on order tbd.

 

[Sport-injected]

Latest list of parts I'm hoarding

-Competition stage 2 clutch 22 lb flywheel
-kzcmc
-whiteline 27mm front swaybar kit
-magic rigid collar kit
-acuity shifter assembly
-half of the RV6 turbo( other half out for jethot coating)

Part on order
-rz crew intake manifold
-ultra racing from lower brace
-ultra racing 3 point subframe brace

Clutch/front sway/kzCmc/rigid collars will be installed by end of month, shifter should be installed this week, turbo will be installed as soon as I get housing back. The remaining parts on order tbd.

Also have new plugs, mobil 5-30 to go in with the turbo

 

[Sport-injected]

3-point brace arrived today.

 

[USNengineman]

I have whiteline end links and an eibach rear sway bar to put on that ive had for almost 6 months

 

[Sport-injected]

I have whiteline end links and an eibach rear sway bar to put on that ive had for almost 6 months

At least you have it ready for install. Since I don't have a garage to do installs, I have to book time at my brothers shop. He lets me use his lift, but it's over an hour away. I end of getting a bunch of parts ready then having install day to knock them all out.

 

[USNengineman]

At least you have it ready for install. Since I don't have a garage to do installs, I have to book time at my brothers shop. He lets me use his lift, but it's over an hour away. I end of getting a bunch of parts ready then having install day to knock them all out.

i mean its been ready!! lol
i send my parts to a buddys house because he has ramps and a jack and stuff. I recently bought my own ramps and tools but left the ramps back home in ohio. so now i gotta wait until hes available ya know. im in no rush though!

 

[Sport-injected]

I installed the acuity adjustable shifter today. For a cable shift assembly this thing is on point. Super tight, very short but it isn't a pain to get into gear. Quality is outstanding

 

[kshawn]

Latest list of parts I'm hoarding

-Competition stage 2 clutch 22 lb flywheel
-kzcmc
-whiteline 27mm front swaybar kit
-magic rigid collar kit
-acuity shifter assembly
-half of the RV6 turbo( other half out for jethot coating)
-drob etune

Part on order
-rz crew intake manifold
-ultra racing from lower brace
-ultra racing 3 point subframe brace

Clutch/front sway/kzCmc/rigid collars will be installed by end of month, shifter should be installed this week, turbo will be installed as soon as I get housing back. The remaining parts on order tbd.

Report back on that manifold. I've been contemplating it. Just for the ability to tab a 4 port meth system.

 

[Sport-injected]

Report back on that manifold. I've been contemplating it. Just for the ability to tab a 4 port meth system.

Will do

 

[hobby-man]

Will do

Are you planning on a fuel system upgrade? And you're running the RV6 turbo right? I can only see an intake manifold upgrade being useful to me if bumping up against maxing out the HPFP. Most cases run out of fuel before air right?

 

[Sport-injected]

Are you planning on a fuel system upgrade? And you're running the RV6 turbo right? I can only see an intake manifold upgrade being useful to me if bumping up against maxing out the HPFP. Most cases run out of fuel before air right?

I will be running the RV6 turbo, I'm not sure about fuel upgrades. It will run out of fuel when trying to achieve max HP but the larger volume of the manifold should help with mid range power where fuel isn't the issue. I'm not really going for high rpm max HP since most of the time I'm not revving the hell out of the car. I want to take it to a track this summer in which mid range pull for coming out of turns is more important to me than high rpm power. If that makes any sense.

 

[Sport-injected]

Rzcrew manifold came in today. Looks really nice, very nicely fabricated. Only issue is the throttle body opening is only 53mm, which is good for the stock throttle body but smaller than my blox 58mm throttle body. There is some extra meat on the TB flange so I'm going to take the dremel to it and open her up to 58mm. Came with teflon gaskets and the fittings for connecting all hoses.

 

[Sport-injected]

Inside the manifold

 

[Sport-injected]

Ported out the manifold from 53 to 57mm to match the blox 58mm throttle body.

Sponsored