New Type-R Style Rear Diffuser for 10th Gen Si Sedan from ABS Dynamics

[xile6]

Just finished mines up. Thought id share the oem info from the manuals.

I popped mines off without removing the bumper.

Also drilled put the mounts so i could use oem clips.

And anyone else Z brackets to short to reach the bumper and the frame?
Ill probably just 3d print some.


But overall came out nice.
Its all scuffed up because i was going to paint match then found out im out of pant. Will order more and paint it later.

 

[revenant]

Are those OEM splash guards? Did they require modification to fit with the diffuser?

 

[xile6]

Are those OEM splash guards? Did they require modification to fit with the diffuser?

Yes the muffler flaps/splash guards need triming.
Pretty much you cut out a square.

I can get photos later if you need it.

 

[Blk_Clover]

I was ready to buy mugen front and sides but my only issue with that is
1. they’re unpainted and they’re damn expensive and
2. shipping cost is like $200+
I’m guessing paint match 250 per item more or less. I’m not that kind of baller ?‍
That’s why I just got the front carbon front type r and matching sides came out to 350-400 shipped no paint necessary ?

Blk_Clover go ahead and get the Mugens I want to see how it looks on a black car ?

Will do, rear diffuser is on the process of drying up, my duckbill from carusedesign is coming in a few weeks, next it will be the side skirts.

 

[Blk_Clover]

must be so exciting to take in those freshly painted fumes. ?

I got just 2 regular masks on and I feel like the paint is building up on my nose hair lmao

 

[Rone811]

I got just 2 regular masks on and I feel like the paint is building up on my nose hair lmao

Hahahaha ?

 

[Omggitsdavid]

Can someone explain to me what these are for? Or show me a photo of how you installed them. I know there is a spot in the center where there are predrilled holes in the lip but I can't seem to figure out the pieces. This is for the sedan si

 

[xile6]

Can someone explain to me what these are for? Or show me a photo of how you installed them. I know there is a spot in the center where there are predrilled holes in the lip but I can't seem to figure out the pieces. This is for the sedan si

Idk about the right.
But the left i believe is for the under support.
Sadly it seens about and inch to short.

Here is a photo.
I plan to 3d print a little adapter.
Currently its just zip tied

 

[Omggitsdavid]

Idk about the right.
But the left i believe is for the under support.
Sadly it seens about and inch to short.

Here is a photo.
I plan to 3d print a little adapter.
Currently its just zip tied

Thanks. Was thinking about doing this too

 

[Blk_Clover]

Idk about the right.
But the left i believe is for the under support.
Sadly it seens about and inch to short.

Here is a photo.
I plan to 3d print a little adapter.
Currently its just zip tied

What about the 2 small pieces?

 

[xile6]

What about the 2 small pieces?

No clue.
Looks like its for the 2 top points to hold then to the bumper.
But a screw and washer would do the same thing.

But either way im not using it.

 

[Blk_Clover]

No clue.
Looks like its for the 2 top points to hold then to the bumper.
But a screw and washer would do the same thing.

But either way im not using it.

I got it to fit in, I guess the 2 big pieces are left and right, got get the right one in, but the clip further left to the tires, I cant seem to bolt it on anything

 

[Omggitsdavid]

I got it to fit in, I guess the 2 big pieces are left and right, got get the right one in, but the clip further left to the tires, I cant seem to bolt it on anything

I just zip tied mine. Didnt like the idea of forcing it to reach the frame. Too much tension going on and it'll have a bent in look which I don't want.

 

[Rone811]

Well lets see if you get yours before me


I see the new data for new orders is 8/31

When i ordered mines it was 8/03.

They told me it would ship soon be we will see by friday what happens.


Keep me updated on your order.

Got my front lip from ABS today

 

[Rone811]

I got it to fit in, I guess the 2 big pieces are left and right, got get the right one in, but the clip further left to the tires, I cant seem to bolt it on anything

Can I get a finally installed photo?

Sponsored