New option for 27Won BBK Rotors

OP
OP
mrburgerUS

mrburgerUS

Senior Member
First Name
Nicholai
Joined
Dec 20, 2019
Threads
21
Messages
216
Reaction score
318
Location
Cincinnati, OH
Vehicle(s)
2020 Civic Hatchback Si Swap
Vehicle Showcase
1
Country flag
I didn’t realize that either I figured for sure stock wheels and spacers would clear.
On the 27Won, you need at least 15mm spacers to use stock wheels. 15mm spacers require trimming the stock studs or extending the studs, which both require modifying the hub some way. I opted for longer studs, which was a big mess. Seriously, get 20mm bolt on spacers from Garageline.
Sponsored

 

jconnway

Senior Member
First Name
James
Joined
Apr 6, 2021
Threads
49
Messages
974
Reaction score
991
Location
New York
Vehicle(s)
2019 Sport Hatch 2017 Sport Hatch
Country flag
On the 27Won, you need at least 15mm spacers to use stock wheels. 15mm spacers require trimming the stock studs or extending the studs, which both require modifying the hub some way. I opted for longer studs, which was a big mess. Seriously, get 20mm bolt on spacers from Garageline.
Oh yeah, that was my first mod, I’ve been running them 9k miles no issues.

I recently picked up OEM Si wheels I think they’re the same spec as the Sport wheels
 

Nickthewaffler

Senior Member
Joined
Sep 24, 2018
Threads
12
Messages
218
Reaction score
205
Location
California
Vehicle(s)
2018 Civic FK7, 2016 Panamera, 2000 AP1 S2000
Vehicle Showcase
1
Country flag
The brembo BBK runs just fine with just some spacers. Reach out to slick fab if you want 27won quality in terms of look without doing the work yourself. The rotors are basic and cheap, and pads are easy to find.
 

Narumi

Senior Member
First Name
Narumi
Joined
Nov 8, 2018
Threads
2
Messages
117
Reaction score
91
Location
Hawaii Kai, HI
Vehicle(s)
2018 Civic Sport, 2015 BRZ Premium, 1990 300ZX 2+2
Country flag
Just wanted to share some rudimentary measurements I've taken for another member in regards to the Genesis Brembo kit. (Don't mean to thread jack but this info may be useful)
First attached pic shows the closest distance from the caliper to center if axle (the hole punch center); which is 3.75".
Second pic is how far the caliper extends outward from the face of rotor top hat which is 1 5/8".
Again, I apologize for the super caveman measurements but it may give the public a better idea of the Genesis Brembo fitment; or help determine how thick of a spacer you will need.
I picked these points because the Rogue rotor top hat may have a larger O.D. diameter and already have the kit fully installed. Unfortunately, I can't provide precise measurements correlating to the stock setup.

Honda Civic 10th gen New option for 27Won BBK Rotors PXL_20210812_085401645


Honda Civic 10th gen New option for 27Won BBK Rotors PXL_20210812_092033163
 

jconnway

Senior Member
First Name
James
Joined
Apr 6, 2021
Threads
49
Messages
974
Reaction score
991
Location
New York
Vehicle(s)
2019 Sport Hatch 2017 Sport Hatch
Country flag
The brembo BBK runs just fine with just some spacers. Reach out to slick fab if you want 27won quality in terms of look without doing the work yourself. The rotors are basic and cheap, and pads are easy to find.
There’s like this whole thing with the pad overhang and the uneven wear and all that…. I feel like the 27Won is perfectly set up
 

Nickthewaffler

Senior Member
Joined
Sep 24, 2018
Threads
12
Messages
218
Reaction score
205
Location
California
Vehicle(s)
2018 Civic FK7, 2016 Panamera, 2000 AP1 S2000
Vehicle Showcase
1
Country flag
There’s like this whole thing with the pad overhang and the uneven wear and all that…. I feel like the 27Won is perfectly set up
Never bothered me once, but yeah its there.
Sponsored

 


 


Top