New - Open Mesh Fog Light Covers for FK8 Type R

[procivic]

Simple to install and inexpensive, these new PRO Design Open Mesh Fog Light Covers will enhance the "race-ready" look that your FK8 Type R already has from the factory.

But of course they are not just for looks; these open mesh fog light covers add a significant amount of extra airflow into your engine bay, which helps prevent heatsoak and keep your K20C1 running at full power. This is especially useful for prolonged aggressive driving or track use, or if you have an intake that sucks air from the engine bay.

These fog covers are direct factory replacements for the stock closed mesh ones, and they are made from high-quality ABS plastic with a nice gloss black finish.

Full product link: https://www.procivic.com/p/m/civic/pro-design-open-mesh-fog-light-covers.html

 

[UnknownNate]

Would these also fit the fk7 hatchbacks or is it different for the type Rs? I've been trying to find a part like this that just has open mesh and isn't way too expensive.

 

[Memogiyi]

or will they fit Si’s?

 

[gxl]

Someone get these and let me know if it's worth it lol. Idk how I feel about having the frame show through like that

 

[HondaRedbullF1]

You could also just cut them out yourself. That's what I did with an Razor blade.

 

[Memogiyi]

You could also just cut them out yourself. That's what I did with an Razor blade.

That seems like a lot of work.. and the potential of some bloody fingers lol

 

[HondaRedbullF1]

That seems like a lot of work.. and the potential of some bloody fingers lol

It takes some time, but not terrible. This would be the money saving route

 

[b534202]

Are the mesh pattern/angle/hole size the same as the lower grille?

 

[TypeSiR]

Are the mesh pattern/angle/hole size the same as the lower grille?

Had these imported from Canada over a year ago. They appear to be the same but holes are smaller than the lower grille. Nice to have if you've an oil/transmission cooler installed behind one of the grilles. Otherwise, it's mainly a cosmetic mod. Super easy to install and take off.

 

[bbeem]

Finally. I DIYd and this is worth the $120 just in time. Good deal.

Where's the rears?

 

[procivic]

Just to clear things up, these mesh fog covers will NOT work on the FK7 hatchback models or Si models. It only works on the Type Rs.

 

[Byron Sexton]

i wonder if this would be worth it for the 2020's and 2021's

 

[procivic]

i wonder if this would be worth it for the 2020's and 2021's

Depends on whether you really like that extra styling on the 2020-2021 factory fog covers.

 

[hesitation]

where is the data to show that you are lowering temps? unless you have side mount oil cooler i'm having a hard time seeing how this will help route air to any cooling system in the car.

 

[Eugene_Fk8]

where is the data to show that you are lowering temps? unless you have side mount oil cooler i'm having a hard time seeing how this will help route air to any cooling system in the car.


I think they just say it gets more air to the engine bay and reduce heat soak.
Personally experience it may delay the heat soak but it will not make a significant difference unless you have oil coolers.

Sponsored