Motor mount 2.0

[socal818]

Would there be any benefit to get a rear motor mount with the 2.0 motor with basic add on’s (Downpipe, intake, ktuner)? Or would I just have a lot of NVH wishing I hadn’t done it!

Sponsored

 

[socal818]

Anyone?

 

[DarkLight]

Anyone?

It will prevent wheel hop when running full bolt-ons/tune. I wouldn’t recommend purchasing an aftermarket mount like hasport, boomba, etc though. Complete overkill for what you’re after.

If you want the highest stiffness with the least vibration, check out the DIY thread I made a couple years ago. Or you can fill in the RMM with window weld and be done.

 

[socal818]

It will prevent wheel hop when running full bolt-ons/tune. I wouldn’t recommend purchasing an aftermarket mount like hasport, boomba, etc though. Complete overkill for what you’re after.

If you want the highest stiffness with the least vibration, check out the DIY thread I made a couple years ago. Or you can fill in the RMM with window weld and be done.

Thank you!

 

[360glitch]

Unless you are having wheelhop issues I would not bother with it.

 

[socal818]

Unless you are having wheelhop issues I would not bother with it.

Appreciate it...I’m gonna leave it alone.

 

[2020k20c2sport]

I figure I'll eventually do it when I run out of other mechanically improving parts to install ha

 

[Civic_rob]

I figure I'll eventually do it when I run out of other mechanically improving parts to install ha

I have the Boomba Rear Motor Mount in my K20C2 CVT Civic. It's not a super noticeable difference but it does help with the engine flex when vtec kicks in. Keeps the engine nice and restrained. Causes more cabin vibration which doesn't bother me but it might bother others.

 

[V3N0M_VZL4]

i have plans to do this but using the SI rear motor mount with the perrin inserts is worth it? my car is CVT

 

[Civic_rob]

i have plans to do this but using the SI rear motor mount with the perrin inserts is worth it? my car is CVT

Dont use a motor mount designed for a manual in a CVT. Boomba Racing reached out after I asked if I could use their manual one and said its a different design.

Sponsored