MHI-TD03 Turbo

[DoubleDown]

I found an interesting comparison video regarding the MHI turbo. I hate posting videos on a forum, but the other MHI thread was closed.

Sponsored

 

[zhendexing]

Nice to have a new thread made regarding this turbo, so @86salmon can share updates here. Easier than digging through his build thread

 

[86salmon]

Getting close to the limits of the TD03 in street tuning. Maxing at 26psi boost and a good amount of timing. Hope to hit a dyno next week or week after

At 3500rpm it PULLS

I might need new tires soon ?

 

[Jes_si562]

Getting close to the limits of the TD03 in street tuning. Maxing at 26psi boost and a good amount of timing. Hope to hit a dyno next week or week after

At 3500rpm it PULLS

I might need new tires soon ?

How much did it put out?

 

[Myx]

Getting close to the limits of the TD03 in street tuning. Maxing at 26psi boost and a good amount of timing. Hope to hit a dyno next week or week after

At 3500rpm it PULLS

I might need new tires soon ?

26psi???? Yeah....we need more info man.

 

[Andregiant12344]

26psi???? Yeah....we need more info man.

U have paddle shifters?

 

[Myx]

U have paddle shifters?

No sir!

 

[Andregiant12344]

No sir!

Then how are u gonna dyno a cvt without paddle shifters

 

[Myx]

Then how are u gonna dyno a cvt without paddle shifters

You must be referring to my post on the Youtube video itself. I can not dyno anything because I don't have paddle shifters (I have tried). I'm interested in a dyno pull with this turbo on a manual or paddle shifter CVT (Before and after). It's not likely but interested in seeing how the full powerband is vs stock. If I could dyno my car, you'd see me dyno'ing every single change I've made up to date because I'm a dyno crack whore. Unfortunately (Maybe fortunately for me...$$$$) I can't dyno without a paddle shifter.

 

[86salmon]

How much did it put out?

No HP/torque numbers yet. Doing email street tune. I hope to get dyno runs in the next week or two

 

[86salmon]

26psi???? Yeah....we need more info man.

More to come...



Soon

 

[varge]

Can you share how much air flow (g/s) you get from 5500rpm and on ?

 

[Myx]

Can you share how much air flow (g/s) you get from 5500rpm and on ?

And fuel injector pulse width. ??

 

[86salmon]

Here's a log with a 3rd gear pull. Timing was nudged up from there on what is likely the last revision

 

[kytos]

My dyno log (TSP stage1 non-si, cold high humidity):

86salmon's log:

Sponsored