Looking to get another set of wheels/tires

[riccardosav]

I’m researching into getting another set of wheels and tires for my FK8 and was looking for some input from the community. It seems like 18x9.5 is the go-to size when it comes to aftermarket shoes, so I was wondering if this size looks good (flush with wheel well and doesn’t make the well look big compared with the wheel) without lowering the car, or using wheel spacers. What would you recommend in terms of offset and sizing if I were to take this route?

Sponsored

 

[lou430]

spoon sw388......you don't need another set wheels after that

 

[Tev42]

there is a 178 page thread available for this question

https://www.civicx.com/forum/thread...market-wheel-guide.13994/page-178#post-817014

 

[type_r_tom]

if you are staying stock height then i would say go with 19's. in my opinion 18's look tiny stock height but if you are set on 18's and want a "flush" look 18x9.5 with a +35mm offset with either a 255/35 or a 265/35 tire will get you the look you want.

 

[merakiautoworks]

How about the Titan7 brand?

Hey Guys,

We just had the pleasure of assisting Titan7 in their shoot of their new TD6 wheel for the FK8 Civic Type R.. Techna bronze sets in stock..