JB4 PiggyBack Tune on Civic Type R

[19typeRblk]

can JB4 read the oil pressure, temp, and water temp?

I think it can just read water temp of the two
I wonder if there is a way to add a oil temp gauge
especially if you track your CTR

Sponsored

 

[IHadToRun]

can JB4 read the oil pressure, temp, and water temp?

I see oil temp and water temp but no oil pressure.

 

[19typeRblk]

I see oil temp and water temp but no oil pressure.

Opps I meant to say oil pressure, and that's very important to have if you are going to track the car. My air cooled Porsche has three, one for pressure, oil level and oil temp. Of course knowing what's going on with your oil in an oil cooled car is very important!

 

[alpinefd]

so
oil pressure, yes or no from jb4 display?
oil temperature, yes or no from jb4 display?

 

[CinciFK19]

so
oil pressure, yes or no from jb4 display?
oil temperature, yes or no from jb4 display?

Oil temp, yes. Oil pressure, no.

 

[19typeRblk]

To add a oil pressure gauge you will need to add a sandwich plate that fits between the oil filter and the engine block. Then you screw in the oil pressure sender into the sandwich plate and then wire that up to your gauge. Just not sure where you would mount the gauge

 

[EnjoyDriving]

Hey, guys. What's the latest firmware? Mine says 92/1//5 , not sure if that's the latest?

Any input would be highly appreciated

 

[CStew81]

Hey, guys. What's the latest firmware? Mine says 92/1//5 , not sure if that's the latest?

Any input would be highly appreciated

Mine says 92/2//5

 

[BoostedDreams]

About to order this.. to run ethanol, do we not need a flex fuel kit like you do with hondata and ktuner ? If not, that’s a huge selling point.

 

[Caestus]

About to order this.. to run ethanol, do we not need a flex fuel kit like you do with hondata and ktuner ? If not, that’s a huge selling point.

I believe you can run 1-2 gallons and have no issues. However..... I would NOT go above that mix on a JB4

 

[BoostedDreams]

I believe you can run 1-2 gallons and have no issues. However..... I would NOT go above that mix on a JB4

The nice thing about the JB4 is the support. They recommend starting with map1, sending them a log, then getting the okay to move to map2 and so on. There is an e30 map as well that i will be trying out once I get my unit on Monday.

 

[TypeSiR]

The nice thing about the JB4 is the support. They recommend starting with map1, sending them a log, then getting the okay to move to map2 and so on. There is an e30 map as well that i will be trying out once I get my unit on Monday.

Have fun!

https://www.civicx.com/forum/thread...nlinking-jb4-tuner-on-civic-type-r-fk8.48619/

 

[BoostedDreams]

Have fun!

https://www.civicx.com/forum/thread...nlinking-jb4-tuner-on-civic-type-r-fk8.48619/

Thanks so much for that link !

 

[201FK8]

Just got my jb4 hoping to rekindle this thread.. I hope we can push them to continue its development...one thing missing after reading the whole thread is dyno numbers. I'll be dynoing my car this February and post my results.

Now, question the is the IAT from the MAF? Or from the MAP?

 

[BoostedDreams]

Just got my jb4 hoping to rekindle this thread.. I hope we can push them to continue its development...one thing missing after reading the whole thread is dyno numbers. I'll be dynoing my car this February and post my results.

Now, question the is the IAT from the MAF? Or from the MAP?

Let me know how you do! I went from JB4 to Ktuner to Hondata. Super happy now.

Sponsored