MGZ
Senior Member
- Joined
- Feb 18, 2016
- Threads
- 3
- Messages
- 176
- Reaction score
- 117
- Location
- Bay Area, CA
- Vehicle(s)
- 2017 Si Coupe, Previously 2016 EX-L (50k miles)
- Thread starter
- #1
Hey all,
Just spent the morning installing the Prl intercooler with a buddy. Install was going pretty smooth until I buttoned everything up and tried to turn the car on. It idles for a little bit (very low, like 500rpm) and starts to sputter. Any ideas on what's going on? All my piping seems pretty tight so I'm wondering if it could be something else. No warnings in the dash. I'll also add that I'm running the Prl short ram with race MAF and tuned with a tsp stage 1 that's set up for it.
Hoping someone with some more experience can chime in on what to check!
Thanks
*Edited with a little more info
Just spent the morning installing the Prl intercooler with a buddy. Install was going pretty smooth until I buttoned everything up and tried to turn the car on. It idles for a little bit (very low, like 500rpm) and starts to sputter. Any ideas on what's going on? All my piping seems pretty tight so I'm wondering if it could be something else. No warnings in the dash. I'll also add that I'm running the Prl short ram with race MAF and tuned with a tsp stage 1 that's set up for it.
Hoping someone with some more experience can chime in on what to check!
Thanks
*Edited with a little more info
Sponsored