intake manifold

[xavierdc1]

anybody know of anyone making an upgraded intake manifold for the 1.5L or if an upgrade would even do any good?

Sponsored

 

[360glitch]

The factory intake system is sufficient for the stock turbo. Anything beyond that is yet to be determined.

 

[Ty3366!!]

How about the RZCrew intake manifold? Assuming this is for the L15B7. Has anyone ran this yet ? Or am i going to be the test subject for it?

 

[MetalKnightCivicHB]

How about the RZCrew intake manifold? Assuming this is for the L15B7. Has anyone ran this yet ? Or am i going to be the test subject for it?

did you install this manifold?

 

[Two Step Performance]

Since we are bringing this thread back to life, it would be relevant to mention Skunk2's new offering:

https://www.twostepperformance.com/...anifold-for-l15b?_pos=11&_sid=198d58ade&_ss=r

We've shipped several this week and we have at least one customer that is going to do some dyno testing for us.

 

[MetalKnightCivicHB]

Since we are bringing this thread back to life, it would be relevant to mention Skunk2's new offering:

https://www.twostepperformance.com/...anifold-for-l15b?_pos=11&_sid=198d58ade&_ss=r

We've shipped several this week and we have at least one customer that is going to do some dyno testing for us.

i was wondering if there's a DIY for this
and of course, I'm looking forward for the dyno testing results

 

[Two Step Performance]

i was wondering if there's a DIY for this

Such as an install guide? I can attach a copy of the instructions.

 

[jconnway]

Looking forward to dyno testing. I doubt this is gonna be a big power add unless you’re fully built with a big turbo

 

[Two Step Performance]

Looking forward to dyno testing. I doubt this is gonna be a big power add unless you’re fully built with a big turbo

Lucky for you our tester has just the setup! (built engine, big turbo, ~40psi, meth)

Hopefully we can get some data on a "closer to stock" setup at some point later down the road.

 

[Ty3366!!]

did you install this manifold?

I have not. But i would ? do the Skunk2 over RZCrew.

 

[Vincent@27WON]

Since we are bringing this thread back to life, it would be relevant to mention Skunk2's new offering:

https://www.twostepperformance.com/...anifold-for-l15b?_pos=11&_sid=198d58ade&_ss=r

We've shipped several this week and we have at least one customer that is going to do some dyno testing for us.

Curious to see the dyno results.

Sponsored