turbo dragon
Senior Member
- First Name
- Chad
- Joined
- Aug 22, 2018
- Threads
- 12
- Messages
- 220
- Reaction score
- 100
- Location
- Macon GA
- Vehicle(s)
- SI X
- Thread starter
- #1
I have a few questions and/or concerns about an install I did this weekend. I already had the PRL CAI, MAP catback exhaust and Ktuner with TSP tune, I installed the Injen intercooler with wrinkle red piping, changed out the intake for the Injen wrinkle red CAI, and completed the exhaust with MAP downpipe and front pipe. The intake went on smoothly, no issues with it, The intercooler went on great, but the intercooler piping on the other hand, did not seem to line up in some areas. I'm concerned with how close the cold side is to one of the radiator hoses, I may be able to get a sheet off paper through that gap and the fact that all the couplings are on pipe a claps width. I have not driven the car yet as it was late last night when we got done putting everything back together, but I did hook the battery back up and at least fire it up, After doing so, I got something on the screen about be careful while driving and the traction control lights where on. Is any of this something I need to be worried about, piping blowing off, lights and warnings on the dash? Any advise is much appreciated.
Sponsored