In Search of CVT 1.5T car in Las Vegas area

[Vincent@27WON]

Like it says, if you got it let me know and we can have you swing by the shop to check out some bits.

Sponsored

 

[Precord96FK7]

Like it says, if you got it let me know and we can have you swing by the shop to check out some bits.

Wish I was closer to lend my car, I'd be all over this.

 

[xRiCeBoYx]

I usually have spare time on the weekends these days.

edit: I also have a buddy with a '16 EX-T sedan

 

[Vincent@27WON]

I usually have spare time on the weekends these days.

edit: I also have a buddy with a '16 EX-T sedan

okay cool. what mods are your car? can you post a few pics?

 

[xRiCeBoYx]

okay cool. what mods are your car? can you post a few pics?

Work network blocks imgur, so I'll post pics a bit later. In the meantime, there are a good amount on my vehicle showcase (though the intake pic isn't in it's configuration it is today): https://www.civicx.com/forum/garage/miyuki.1218/

Engine/performance related mods:

• DIY intake (extracted MAF housing from OEM filter cover): AEM dryflow filter, mishimoto intake tube, and a sort of RAM induction with fiberglassed "heat shield" that allows it to grab air from the bumper and send it directly to the filter.
• Muffler delete (stock res in place)
• KTuner V1.2 with Phearable tune

Suspension mods:

• Si springs
• FK8 rear sway bar
• FK8 subframe brace
• Accord endlinks
• DC Sports front upper strut bar

Not a whole lot of performance mods, and I have a bunch of otherwise cosmetic mods on top of those.

As far as I know, my buddy only has a 27WON intake as his only mod. I installed it for him. lol


Edit: some pics I found not blocked by work firewall

(old pic, current intake config looks like the next pic)

and this feeds into that little box around the filter via some cheap ducting. It looks kinda ghetto when you take it all apart, but it gets the job done

just to show how far down the exhaust was chopped for the muffler delete

 

[Vincent@27WON]

Work network blocks imgur, so I'll post pics a bit later. In the meantime, there are a good amount on my vehicle showcase (though the intake pic isn't in it's configuration it is today): https://www.civicx.com/forum/garage/miyuki.1218/

Engine/performance related mods:

• DIY intake (extracted MAF housing from OEM filter cover): AEM dryflow filter, mishimoto intake tube, and a sort of RAM induction with fiberglassed "heat shield" that allows it to grab air from the bumper and send it directly to the filter.
• Muffler delete (stock res in place)
• KTuner V1.2 with Phearable tune

Suspension mods:

• Si springs
• FK8 rear sway bar
• FK8 subframe brace
• Accord endlinks
• DC Sports front upper strut bar

Not a whole lot of performance mods, and I have a bunch of otherwise cosmetic mods on top of those.

As far as I know, my buddy only has a 27WON intake as his only mod. I installed it for him. lol


Edit: some pics I found not blocked by work firewall

(old pic, current intake config looks like the next pic)

and this feeds into that little box around the filter via some cheap ducting. It looks kinda ghetto when you take it all apart, but it gets the job done

just to show how far down the exhaust was chopped for the muffler delete

okay great, I will likely reach out to you or your buddy in the next 2-3 weeks to get you in here to check some bits. I will keep you posted.

 

[xRiCeBoYx]

okay great, I will likely reach out to you or your buddy in the next 2-3 weeks to get you in here to check some bits. I will keep you posted.

Sounds good!

I completely forgot he had a CivicX account bc he's not really active, but he's @mdd1994

 

[Vincent@27WON]

Sounds good!

I completely forgot he had a CivicX account bc he's not really active, but he's @mdd1994

perfect, thank you guys

 

[Vincent@27WON]

Sounds good!

I completely forgot he had a CivicX account bc he's not really active, but he's @mdd1994

I am going to shoot you a DM.

 

[Vincent@27WON]

Work network blocks imgur, so I'll post pics a bit later. In the meantime, there are a good amount on my vehicle showcase (though the intake pic isn't in it's configuration it is today): https://www.civicx.com/forum/garage/miyuki.1218/

Engine/performance related mods:

• DIY intake (extracted MAF housing from OEM filter cover): AEM dryflow filter, mishimoto intake tube, and a sort of RAM induction with fiberglassed "heat shield" that allows it to grab air from the bumper and send it directly to the filter.
• Muffler delete (stock res in place)
• KTuner V1.2 with Phearable tune

Suspension mods:

• Si springs
• FK8 rear sway bar
• FK8 subframe brace
• Accord endlinks
• DC Sports front upper strut bar

Not a whole lot of performance mods, and I have a bunch of otherwise cosmetic mods on top of those.

As far as I know, my buddy only has a 27WON intake as his only mod. I installed it for him. lol


Edit: some pics I found not blocked by work firewall

(old pic, current intake config looks like the next pic)

and this feeds into that little box around the filter via some cheap ducting. It looks kinda ghetto when you take it all apart, but it gets the job done

just to show how far down the exhaust was chopped for the muffler delete

Just sent you a DM

 

[TheFast&TheDizzle]

I’ve got a 2018 Sport Touring Hatch!
I’m down to come to Vegas to let you guys do your thing.
Let me know bro!

 

[Vincent@27WON]

I’ve got a 2018 Sport Touring Hatch!
I’m down to come to Vegas to let you guys do your thing.
Let me know bro!

Thanks my guy. Will keep you posted if needed but we should be good for now.

Sponsored