Saw this posting on a FB group. Has anyone else installed a set of calipers for a Genesis on their non-CTR? In the comments it says any model coupe fits as long as you have spacers.
Only the front.Do all 4 corners swap? If so this is definitely the route to go in terms of BBK
I've seen that. From what I've read in the comments, any genesis coupe brembos fit along with the Nissan Rogue rotors. Never heard of this before.I know the DC5-R brembos fit, there is a video of a guy who swapped them and just happened to have his painted the same color too. I havnt seen anything about the genesis ones though. This is a first for me.
Which wheels if you dont mind me asking?Only the front.
I've had these on my car before. With the proper shims and rotors, they bolt right up. It was difficult to find wheels that fit over them, I was running 8.5" wide wheels with a 35mm offset and still had to use a 5mm spacer to barely clear them.
I'd be very careful with that. If it were me I'd try to find some extended lugs before then. I *think* my spacers were only 3mm (not 5mm like I previously posted). They worked ok, but I would not have been comfortable with 10mm spacers.Damn it! All I have are 10mm spacers. Hopefully Ill have enought bite on the lugs with them on. Thanks for the info! Installing on Saturday
Thanks for the info. Im gonna wait to install until I get my spacers in the mail. I bought 3mm and 5mm just in case.I'd be very careful with that. If it were me I'd try to find some extended lugs before then. I *think* my spacers were only 3mm (not 5mm like I previously posted). They worked ok, but I would not have been comfortable with 10mm spacers.