Hondanickx
Senior Member
- First Name
- Nick
- Joined
- Jun 10, 2018
- Threads
- 61
- Messages
- 1,041
- Reaction score
- 789
- Location
- Belgium
- Vehicle(s)
- 1998 civic hatch , 2018 civic sedan 1.5T
- Build Thread
- Link
- Vehicle Showcase
- 1
- Thread starter
- #1
Hi guys ,i'm Nick from Belgium and i own a 2018 Civic Sedan 1.5T (FC1).
(No it's not a SI ,and yes the chassis is also FC1 in europe)
At the moment i only have a few mods done to the car but i plan to do some minor mods to improve the whole suspension and engine.
Mods so far are :
- PRL intake tube With Sprint Filter Air filter
- Front aftermarket grill
- Oem Type-R Red badges
- N-XTC Glass coated the car
- Rear windows tinted 5%
I also have some new wheels which have some slight curb damage and need to be powdercoated again.
These are the Prodrive GC010E Forged wheels by Rays 18x8.5 ET34.
And i also allready have these parts ready to go
- Si Shifter
- Si Springs
- Si Airbox
- Type-R exhaust which will be modified to fit the sedan.
I always owned a 98 civic hatch before ,which had full hardrace suspension bushings everywhere ,koni yellow shocks,spoon springs,itr steering rack ,short trans ,...It was a blast to drive that car but it had its age and my daugther being born back then made me move into another car.
I'm a welder and a DIY kinda guy ,and you can also see what i'm doing on my facebook page "H.N Innovations".
(No it's not a SI ,and yes the chassis is also FC1 in europe)
At the moment i only have a few mods done to the car but i plan to do some minor mods to improve the whole suspension and engine.
Mods so far are :
- PRL intake tube With Sprint Filter Air filter
- Front aftermarket grill
- Oem Type-R Red badges
- N-XTC Glass coated the car
- Rear windows tinted 5%
I also have some new wheels which have some slight curb damage and need to be powdercoated again.
These are the Prodrive GC010E Forged wheels by Rays 18x8.5 ET34.
And i also allready have these parts ready to go
- Si Shifter
- Si Springs
- Si Airbox
- Type-R exhaust which will be modified to fit the sedan.
I always owned a 98 civic hatch before ,which had full hardrace suspension bushings everywhere ,koni yellow shocks,spoon springs,itr steering rack ,short trans ,...It was a blast to drive that car but it had its age and my daugther being born back then made me move into another car.
I'm a welder and a DIY kinda guy ,and you can also see what i'm doing on my facebook page "H.N Innovations".