You rub with 18x9.5 et38? Im on 18x9.5 et40 and I have a crap load of space left before rubbing. How much camber are you running and how low are you?
Natural camber in the rear, maxed out camber plates on bcracing coils. I’m lowered a good amount, and only rub on steep inclines at an angle.
Your correct. Im using 245/35 but if ur gonna use 245 or 235/40, im not sure about that coz ul have bigger tires with +24 offset so the wheel gap is smaller and depends on your dampening level.
Hks is pretty high quality, I like It better than bcracing which in my own experience is garbage in comparison. On the note of stiffness, I wanted to know your springrate because it determines bottoming out on some bumps.
Not sure exact number. Just know it’s maxed out on the top plates. And 2-3 inch lower. I’m tucking front tire just a bit.
Looks great. What size tires tho?18x10 +38 (with 12mm spacers on all corners to clear bbk making it +26). Got all 4 corners rolled and I can still cruise close to being aired out. I’m running -3 camber in front and natural camber in the back. Do it! @ambatadrive on IG for more reference.
Bro, you are king. I'm not even going for anywhere to near that stance and now I've got a lot of confidence in this. Thanks!18x10 +38 (with 12mm spacers on all corners to clear bbk making it +26). Got all 4 corners rolled and I can still cruise close to being aired out. I’m running -3 camber in front and natural camber in the back. Do it! @ambatadrive on IG for more reference.
I would love for my car to be able to get that low. How much did everything cost from stock to this?
looks amazing, want to do something similar with my Si if I can find the funds haha.18x10 +38 (with 12mm spacers on all corners to clear bbk making it +26). Got all 4 corners rolled and I can still cruise close to being aired out. I’m running -3 camber in front and natural camber in the back. Do it! @ambatadrive on IG for more reference.
Did fatstance do your fenders yet?
