[GROUP BUY] Paragon Performance 4-piston 330mm Big Brake Kit (BBK)

[Unity Performance]

Hey everyone, Super excited to host another Paragon Performance Group Buy! This BBK is for our 10th (non-Type R) folks, and it'll also fit 8th, 9th, 11th Gen Civics, and DE4 Integra!

Bit of history - we first introduced the Paragon brand to the Civic community in 2021, and since then Paragon has gone on to become the #1 choice for FK8/FL5 aftermarket two-piece Rotors, their brake pads are highly rated in the community for street and track use, and their BBK's have been run very successfully by enthusiasts such as ourselves and even Honda's HPD race team competing at 25-hours of Thunderhill!

Paragon Track Performance Big Brake Kit (PA055 4 piston / 330mm) - Honda Civic + Acura Integra

This complete, track ready brake kit features the same PA055 4 piston calipers that Team Honda Research West use on their 25 Hour of Thunderhill 11th Gen Civic Si endurance race cars. Many of its components have been track-proven in one of the most grueling endurance races in North America.

This Brake Kit is a direct swap on all 2006+ Honda Civic models (excluding FK2/FK8/FL5), everything you need is included. 17" or larger wheels will be required to clear the brake kit in the barrel, and OEM 18" 10th Gen Wheels will require a 20mm Spacer. Aftermarket wheels, 17x9 +40, 18x8.5 +35, 18x9.5 +38, 18x9.5 +45 are generally safe to run without requiring spacers. Please refer to Wheel Template, and How to Use Wheel Template

Includes:

• One pair of Paragon PA055 4 piston calipers
• One pair of Paragon fully-floating 2-piece rotor assemblies with hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips
• One set of Paragon P3 "Street/Track" semi-metallic brake pads (manufactured by Winmax Japan, other compounds available at additional cost)
• One pair of caliper mounting brackets and all necessary hardware
• One pair of Goodridge DOT approved stainless steel braided brake lines
• One set of caliper anti rattle clips
• Detailed installation manual

To learn more about the Big Brake Kit, as well as complete the initial payment please visit the product page:

https://unity-performance.com/produ...30mm-big-brake-kit-bbk-06-22-civic-non-type-r

The payment made during the initial Group Buy Deposit process is only $500 of the total amount. The remaining total amount will be collected at the Group Buy Deadline Date: Friday, August 11th, 2023.

******Extended to Friday, August 18th for any last entrants!!******

The "total amount" will vary on pad selection, and more importantly how many entrants there are. More entrants = bigger discount. You are committing to a non-refundable deposit once the minimum requirement of 5 entrants have been met - to ensure the Group Buy's success, spread the word to your Honda and Acura friends. If in the unfortunate case the minimum requirement for 5 entrants has not been met, deposits will be refunded.

5-9 entrants: 15% discount

10+ entrants: 20% discount

The "total amount" will be calculated as such: MSRP - Discount % - $500 Deposit. Shipping will be FREE for USA and Canada, International folks will be provided quotes manually.

• P2 (Street/Sport): $2,450 USD MSRP. Potential savings up to $490 USD
  • 15% Discount - $2,082.5.
  • 20% Discount - $1,960.
    • Subtract -$500 for deposit already paid.
• P3 (Street/Sport/Light Track): $2,450 USD MSRP. Potential savings up to $490 USD
  • 15% Discount - $2,082.5.
  • 20% Discount - $1,960.
    • Subtract -$500 for deposit already paid.
• R5 (High Friction Track/Competition): $2,515 USD MSRP. Potential savings up to $503 USD
  • 15% Discount - $2,137.75.
  • 20% Discount - $2,012.
    • Subtract -$500 for deposit already paid.
• R7 (Maximum Friction Track/Competition): $2,555 USD MSRP. Potential savings up to $511 USD
  • 15% Discount - $2,171.5.
  • 20% Discount - $2,044.
    • Subtract -$500 for deposit already paid.

List of entrants:

1. Guillermo L.
2. Adrian H. (FC1)
3. Callum D.
4. Adrian H. (FK7)
5. Open
6. Open
7. Open
8. Open
9. Open
10. Open
11. Open
12. Open

Looking forward to answering any of your questions. I've personally been running the Paragon 6-piston Big Brake Kit on my FK8 for over a year and it's a fantastic bit of engineering! They haven't let me down on street, track, Tail of the Dragon, and I have to essentially reprogram my driving habits anytime I get into into other cars to factor in the brakes are much weaker and stopping distances are greater.

Excited to see this Group Buy launch, and be successful with your help! If you are looking for any other Paragon Performance products, please check out the list HERE. Feel free to PM with any questions on other products or pricing as well. Thank you!

Best,

Humza

 

[Unity Performance]

Putting the Paragon BBK on my FK8 to use Best brakes I've ever had on any car!

 

[pinhead66]

That's a very nice kit and it's always great to have more options for the 10th gen platform. Not interested in this myself as I just recently put on another BBK but the potential 15% savings is very enticing for this high quality package.

Printed up the wheel clearance template just for kicks and compared them to other templates I've printed up in the past. Compared to the 27won template, the paragon sticks out about 12mm further to the spokes. Compared to the stoptech and wunderladen ebc templates, the paragon has about 2mm more clearance to the spokes. Stock wheels would definitely need about a 15-20mm spacer.

 

[Two Step Performance]

Great opportunity. Love the Paragon kit!

 

[ronmcdon]

looking really good! very tempted

 

[Unity Performance]

That's a very nice kit and it's always great to have more options for the 10th gen platform. Not interested in this myself as I just recently put on another BBK but the potential 15% savings is very enticing for this high quality package.

Printed up the wheel clearance template just for kicks and compared them to other templates I've printed up in the past. Compared to the 27won template, the paragon sticks out about 12mm further to the spokes. Compared to the stoptech and wunderladen ebc templates, the paragon has about 2mm more clearance to the spokes. Stock wheels would definitely need about a 15-20mm spacer.

Thank you for confirming the fitment for everyone

Correct, the 20mm Spacer leaves safe space for the OE wheels, although I sure hope anyone getting this kit has already gotten a set of aftermarket wheels with sticky tires

I do offer the 27WON and Wunderladen EBC Kit, both offer great value and will hold up to mild track use. For a lot of track use, I would still go for Paragon as these compete with the competition kits from manufacturers like AP Racing, Brembo GT, StopTech Trophy.

~ $2K for a competition kit is really great!

 

[Unity Performance]

Great opportunity. Love the Paragon kit!

Glad you're loving yours, Corey! Super tempted to put one on our FL5 too!

 

[Unity Performance]

Alright guys, the first entrant Guillermo L. is in! I know everyone cautiously awaits for the first person to join before committing if they're on the fence, so here we have a Paid deposit ready to go!

Feel free to ask me any questions, I've done over 10k miles and most of which have been very spirited (6 track days, Tail of the Dragon trip)! Next week I'm at another track day and I have zero worries slowing down from 120+ mph into corners lap after lap after lap. I remember my first ever track day in my 2017 Si, my stock pads after 3 sessions had less than 2mm left on them - don't be that guy, my drive home was terrifying!

 

[Unity Performance]

Good morning, another entrant and frequent Unity fan Adrian H. has joined the Group Buy!

 

[Unity Performance]

Another entrant! Callum D. is in

I was absolutely thrashing on the brakes last Wednesday at Mosport GP in the FK8, doing 15+ minute sessions and didn't feel the Paragon BBK give out at all. The tires would get greasy before the brakes showed any signs of fade.

2 more entrants needed!

 

[ronmcdon]

thanks again for this deal. looking forwards to improvenment over the stock Si brakes and the limited amount of brake pads available for the caliper.

Ah if only paragon would offer a solution to use 2 piece rotors for the 10th gen Si, like they do the 9th and 8th gen that would have been great.

 

[Unity Performance]

thanks again for this deal. looking forwards to improvenment over the stock Si brakes and the limited amount of brake pads available for the caliper.

Ah if only paragon would offer a solution to use 2 piece rotors for the 10th gen Si, like they do the 9th and 8th gen that would have been great.

You're here!! Thank You for entering the Group Buy twice

With the success of the Group Buy, I can definitely bring it up with Paragon for a future project!

Sponsored