GramLights 57xtreme & 57transcend 18x8.5 offsets for face-2 (more concave face)?

[jandr272]

I'm trying to find out what offset option come with face-2 (the more concave wheel face) for the 57Xtreme and 57Transcend.

Ray's website lists the 57Xtreme in 18x8.5 41mm with face-2, and 36mm, 44mm, and 48mm with face-1; however, Ray's doesn't list the 31mm, 33mm, or 34mm, which are for sale by a few different retailers, without the face design specifics.

Ray's also lists the 57Transcend in 18x8.5 50mm with face-1, and the 18x9.5 38mm or 39mm with face-2; but the retailers have 8.5 listed in 32mm and 38mm, again without the face design specs.

Sponsored

 

[alexzhao]

If you don't see it on the Rays website, it is either 1, an overseas spec or 2, discontinued.

Source: Rays distributor for 10 years

P.S. where did you see those offsets listed?

 

[jandr272]

P.S. where did you see those offsets listed?

Thank you for the info, that helps a lot. I went ahead and ordered the 8.5 with 41mm offset. Finally found a good pic of the 9.5 and poked a bit too much.

Vivid Racing has several of those offsets in stock. I think Fitment Industries or MAPerformance also had a few of the non-standard ones listed.

 

[SonicBreezerST160]

Normally, the 8.5" widths will be 'Face 1'. I believe all 9.5" are 'Face 2'. If the 9.5" comes in a 44mm offset (?) they would fit fine w/o any poke.
Edit: That wheel does indeed show 18x8.5", 41mm with 'Face 2', however I'm sure it would have to be special ordered from Japan. Try Evasive Motorsports, they have great access to JDM stuff.

Sponsored