First_Civic
Senior Member
- Joined
- Dec 4, 2016
- Threads
- 4
- Messages
- 72
- Reaction score
- 27
- Location
- California
- Vehicle(s)
- 16 EXL Lunar SIlver
- Thread starter
- #1
I installed a Fumoto Drain Valve (F106SX) around 5k miles on my Civic EX-L. Honda Maintenance Minder is telling me I need to change it around 9500 miles, didn't really think much of it because I live in the city.
I see gunk on my drain valve, and am assuming the valve is leaking.
https://imgur.com/a/U8stUnu
I'm assuming I need to buy a new valve. Didn't have a torque wrench atm, so couldn't try to refit it (don't think it would matter anyways). I guess I'm wondering how bad the situation is. Do you guys think it could have damaged the engine?
Edit: So I measured the used oil, measures around 4 quarts, which is approximately how much I used last oil change. Unless conveniently there was enough fuel dilution to compensate?
I see gunk on my drain valve, and am assuming the valve is leaking.
https://imgur.com/a/U8stUnu
I'm assuming I need to buy a new valve. Didn't have a torque wrench atm, so couldn't try to refit it (don't think it would matter anyways). I guess I'm wondering how bad the situation is. Do you guys think it could have damaged the engine?
Edit: So I measured the used oil, measures around 4 quarts, which is approximately how much I used last oil change. Unless conveniently there was enough fuel dilution to compensate?
Sponsored
Last edited: