98-0425
Senior Member
- First Name
- Nick
- Joined
- Jun 18, 2017
- Threads
- 146
- Messages
- 1,484
- Reaction score
- 1,225
- Location
- Las Vegas
- Vehicle(s)
- 18 Civic Type-R #12307, 98 Integra Type-R #0425, 07 Pilot EX-L, 17 Pilot Elite
- Thread starter
- #1
For Sale: $6 shipped
Map Light Mod Jumper Wire (with two small zip ties). The jumper wire is an OEM wire with OEM terminal. The wire you will get will be blue or yellow.
Info/Instructions
This mod allows the map light to turn on simultaneously with the dome light when the car unlocks or when the unlocked door is opened. Map light will also function independently like normal.
Assuming you know how to remove your map light and dome light (pop off the lenses to reveal two screws to remove each), all you need additonally is a metal clothes hanger to fish the wire.
The trick to fishing the wire through is to start from the map light side and end at the dome light. Do not bend over the tip of the clothes hanger; it makes it too blunt and difficult to fish through the headliner. Once the clothes hanger is through, tape the stripped end of the wire to the hanger and pull the jumper wire through.
Now take the terminal end of the jumper wire and insert it into the open spot in the white OEM connector (the larger one towards the driver side). You will hear a small click which let's you know that the terminal is secured. The orientation of the terminal going into the connector is important. (See pic below). Secure the jumper wire to the factory harness using a small zip tie; I used electrical tape instead.
Now take the stripped end of the jumper wire and zip tie it to the dome light harness. Secure the stripped wire by wedging it in between the ground terminal of the dome light and the plastic housing. You may need a small flathead screwdriver to pry the ground terminal away a little from the plastic in order to insert the stripped end of the jumper wire.
Reinstall the two light units and enjoy.
Map Light Mod Jumper Wire (with two small zip ties). The jumper wire is an OEM wire with OEM terminal. The wire you will get will be blue or yellow.
Info/Instructions
This mod allows the map light to turn on simultaneously with the dome light when the car unlocks or when the unlocked door is opened. Map light will also function independently like normal.
Assuming you know how to remove your map light and dome light (pop off the lenses to reveal two screws to remove each), all you need additonally is a metal clothes hanger to fish the wire.
The trick to fishing the wire through is to start from the map light side and end at the dome light. Do not bend over the tip of the clothes hanger; it makes it too blunt and difficult to fish through the headliner. Once the clothes hanger is through, tape the stripped end of the wire to the hanger and pull the jumper wire through.
Now take the terminal end of the jumper wire and insert it into the open spot in the white OEM connector (the larger one towards the driver side). You will hear a small click which let's you know that the terminal is secured. The orientation of the terminal going into the connector is important. (See pic below). Secure the jumper wire to the factory harness using a small zip tie; I used electrical tape instead.
Now take the stripped end of the jumper wire and zip tie it to the dome light harness. Secure the stripped wire by wedging it in between the ground terminal of the dome light and the plastic housing. You may need a small flathead screwdriver to pry the ground terminal away a little from the plastic in order to insert the stripped end of the jumper wire.
Reinstall the two light units and enjoy.
Last edited:
