FS: 2 sets of OG TE37 (Mercury and Formula Silver)

[kkakonn]

I have 2 total sets of OG TE37 for sale. One set is brand new never mounted, and one set is used lightly and have tires currently mounted on them.

New set
18x9.5 +28 Formula Silver
$3200 picked up

Used set (500 miles and 1 track day with 3 heat cycles)
18x9.5 +28 Mercury Silver
265/35 Michelin Pilot Sport Cup 2
TPMS
$4000 picked up

OG TE37's have been discontinued and can no longer be ordered new. These are the last of them.
Pictured below are the two sets when I first got them. Will have more pictures of the Mercury silver set mounted with tires shortly. I'm in SoCal 91006

Sponsored

 

[kkakonn]

those dont fit our cars.. too agressive

really? How did these guys get them on then

 

[ExVTEC]

really? How did these guys get them on then

 

[Caestus]

Look at the Camber. Not everyone wants to run that camber.

 

[.grimace]

Not sure how you can tell camber from a side photo

 

[ez12a]

you can only achieve that kind of tuck with +28 with lots of camber. Just a browse through the aftermarket wheel thread will show not even a wheel in the 30 range tuck that well.

You can also find pics of this CTR from different angles to confirm.

 

[VinRRR]

The tires in the pic is stretched also.

 

[kkakonn]

The tires in the pic is stretched also.

As per evasive's post a 255 tire works on this fitment with camber. And according to the attachment below from Michelin a 255 tire's acceptable rim width is 8.5-10"

 

[kkakonn]

Look at the Camber. Not everyone wants to run that camber.

you can only achieve that kind of tuck with +28 with lots of camber. Just a browse through the aftermarket wheel thread will show not even a wheel in the 30 range tuck that well.

You can also find pics of this CTR from different angles to confirm.

You may not want to but someone may want to. I posted that image in response to the previous comment which had stated that this fitment would not fit Type R's.

This is a for sale thread, not a wheel fitment discussion thread. Theres plenty of that on this forum.

 

[ez12a]

If anything I think it's good to make it known in the thread so your future buyer is aware.

Benefits both parties if it's known the wheels require supporting mods. You don't want an unhappy customer.

 

[kkakonn]

If anything I think it's good to make it known in the thread so your future buyer is aware.

Benefits both parties if it's known the wheels require supporting mods. You don't want an unhappy customer.

Which im on board with. I would have let anyone know who was interested anyway. My problem is with the people who had mentioned false information about the wheels "not fitting the car". Even though many have and will.

 

[.grimace]

you can only achieve that kind of tuck with +28 with lots of camber. Just a browse through the aftermarket wheel thread will show not even a wheel in the 30 range tuck that well.

You can also find pics of this CTR from different angles to confirm.

I know this but from that photo you cannot “look at the camber”. Either way it depends on the end user I’m running -2.7 front and -2.2 rear and don’t find that extreme but the use of my car isn’t what most will be.

 

[spaghettixsauce]

Ugh. Why now?

Sponsored