FS: 18" Rays Volk #systemspec TE37SL - 18x9.5 +38 5x114.3 - Pressed Graphite

System Motorsports

Thomson
CivicX Basic Sponsor
First Name
Thomson
Joined
Jun 7, 2018
Threads
30
Messages
947
Reaction score
797
Location
Hayward
Vehicle(s)
FK8 Civic Type R
Country flag
To the 10th Gen Civic/SI Community:

We have for sale what we believe to be the holy-grail wheel and sizing combo for the FK7 Civic Platform - #systemspec Volk TE37SL in 18x9.5 +38, 5x114.3 Concave Face. We have been working very closely with Rays directly for years, and have sold hundreds of sets of these wheels alone to both the CivicX and the FK8 Type R community (as well other platforms as well). This set is special, in that it exhibits a concave GTR face profile; incredibly rare for a wheel in this width/offset combo. For reference, 18x9.5 +40 5x114.3 and 18x9.5 +35 5x114.3 is flat-face.

This spec is our exclusive shop spec, and there is no other sizing quite like it. These came in as part of our batch order, and took about ~6+ months for them to finally arrive from Japan.

Wheel Model:
Visually, what you see is what you get, these are truly concave. These share the highly coveted concave face, dubbed the GTR concave face. It is the same deep concavity found on sizes such as the 18x9.5 +22, and even has the same lip size! Visually, these wheels are 100% identical to the +22 offset counterpart.

For those who are not familiar with this model of TE37, it shares the same "mold" as the OG TE37, which was discontinued back in 2018. Maintaining a highly classic profile and look to it, the TE37SL looks nearly identical to the TE37 OG, AND it's lighter + stronger. These are the same wheels used in pro-tier competition and racing. One of the most noticeable and sought after aspects of these wheels are its concave face. Prior to us procuring this size exclusively for the Civic and Type R market, it was not possible to achieve this level of concavity at these widths and offsets. Normal catalog specs would have produced this wheel in a "flat-face" configuration, though in our opinion it is not visually appealing. However, thanks to countless hours of research and R&D/measurements, we were able to help make this concave face possible for the community, while maintaining strut clearance and brake clearance (very important)!

Note: We are responsible for the procurement of a handful of other sizes as well - All maintaining the highly sought-after concave face profile. If you are interested, send us a message or reach out to us directly, and we will let you know what we offer exclusively to the community! Many of our sizes are not widely distributed and they are not your average run-of-the-mill sizing.

Size:
18x9.5 +38, 5x114.3

Color:
Pressed Graphite (Certain colors are special-order and will command a lead time, other colors may be in stock if you are lucky!). Get in touch with us to inquire on ETA!

Centerbore:
73.1 - Will fit a variety of cars! Hubrings are recommended but not necessary when equipped, as wheels are lug-centric!

Fitment:
Great fitment for Civics on lowered on springs/coilovers (Eibach/Swift/Spoon/etc). This fitment is ideal for those who enjoy spirited drives in their cars and on occasion like to take their cars to the track. Also great fitment for S2000, 15+ WRX/STI, 08+ STi, etc

Technical specs:
The TE37SL model has ditched the center-cap design and opted to go centercap-less to achieve additional weight savings, however; we can source centercap adapters + centercaps for you if this is the route you chose to go. You will also need aftermarket conical tuner lugnuts to fit these on your car (Most aftermarket wheels will not accommodate OEM lugnuts as they are simply too big. Inquire with us directly if you are concerned about lugnut compatibility, we can help!). These wheels are forged monoblock 1-piece, and weigh in at around ~18lbs per wheel. Very light!

Big Brake Clearance:
Fits - OEM Brakes + aftermarket BBK upgrades

Location:
Hayward, CA - Will ship to all 50 states.

Price - Wheels:
$3299 + shipping (if applicable)

Items included:
Wheels (4 total)
Valvestems (4 total)
Spoke stickers (4 total)
Lip stickers - Preapplied (4 total)
All authenticate paperwork + tags

Honda Civic 10th gen FS: 18" Rays Volk #systemspec TE37SL - 18x9.5 +38 5x114.3 - Pressed Graphite IMG_4824.JPG


Honda Civic 10th gen FS: 18" Rays Volk #systemspec TE37SL - 18x9.5 +38 5x114.3 - Pressed Graphite IMG_4823.JPG


Honda Civic 10th gen FS: 18" Rays Volk #systemspec TE37SL - 18x9.5 +38 5x114.3 - Pressed Graphite IMG_4827.JPG
 

madchiller

Senior Member
First Name
Chad
Joined
Apr 8, 2018
Threads
14
Messages
923
Reaction score
1,007
Location
DFW, TX
Vehicle(s)
2018 Civic Si
Build Thread
Link
Vehicle Showcase
1
Country flag
i test fit these on a car with the genesys brembos and they'd need maybe 3-5mm spacer to clear. i've seen on the facebook groups of the 27won bbk clearing without the need for any spacer.

5 star.. would recommend. :)

Honda Civic 10th gen FS: 18" Rays Volk #systemspec TE37SL - 18x9.5 +38 5x114.3 - Pressed Graphite IMG_0009
 
OP
OP
System Motorsports

System Motorsports

Thomson
CivicX Basic Sponsor
First Name
Thomson
Joined
Jun 7, 2018
Threads
30
Messages
947
Reaction score
797
Location
Hayward
Vehicle(s)
FK8 Civic Type R
Country flag
i test fit these on a car with the genesys brembos and they'd need maybe 3-5mm spacer to clear. i've seen on the facebook groups of the 27won bbk clearing without the need for any spacer.

5 star.. would recommend. :)

IMG_0009.jpg
Love how it turned out!
 


 


Top