Flashing back to stock for PA Emissions/inspection. Do I also need to unlock?

raynist

Senior Member
First Name
Ray
Joined
Jun 10, 2018
Threads
40
Messages
326
Reaction score
100
Location
Pittsburgh
Vehicle(s)
2018 Cosmic Blue Civic EX-T Manual
Country flag
Taking the car in on 1/21 for PA State Inspections/Emission. I know I have to drive at least 60 miles for emission readiness as I had a problem one time replacing a battery the day before inspection.

Do I need to unlock my unit after flashing back to stock?

I am not going to a Honda deal for this.

Thanks
Ray
Sponsored

 
First Name
Sam
Joined
Nov 30, 2018
Threads
2
Messages
16
Reaction score
4
Location
Houston
Vehicle(s)
2016 Civic EX-L CVT Ktuner Stage 1
Country flag
I flashed back to stock for TX state inspection. I think unlocking ecu is unnecessary.
 

fenix-silver

Senior Member
Joined
Nov 12, 2018
Threads
27
Messages
1,184
Reaction score
969
Location
Central PA
Vehicle(s)
2019 Si
Country flag
Taking the car in on 1/21 for PA State Inspections/Emission. I know I have to drive at least 60 miles for emission readiness as I had a problem one time replacing a battery the day before inspection.

Do I need to unlock my unit after flashing back to stock?

I am not going to a Honda deal for this.

Thanks
Ray
I've had my WRX ECU tuned for 8 years and never had to reflash to stock in PA. As long as you aren't throwing any codes and all of the readiness monitors are set, you'll be good to go.
Sponsored

 


 


Top