FK8 Civic Type R Aggressive Wheel Fitment Thread/Database!

[DocLL]

2018 Type R
Suspension: OEM
Wheel Specs: Advan TC-4 18x9.5 +38
Tires: 265/35/18

 

[fk8_sqwishy]

Gram Light 57CR in gunblue, 18x9.5 +38
Continental ECS 265/35
Eibach Prokit
No rub, no fender mods

 

[System Motorsports]

I don’t want to trim the fenders,how much camber do you think it could need to make it fit

I would recommend -2.5 square should do it!

 

[Alexfk8]

I would recommend -2.5 square should do it!

Thanks

 

[Shooby-]

I am going lower on eibach sportlines soon and was wondering if my current setup of 18x9.5+45 255/40 will end up rubbing? I will have front ball joints to accomodate more camber in front but don’t know if rears will end up rubbing.

 

[CTRDre]

Gram Light 57CR in gunblue, 18x9.5 +38
Continental ECS 265/35
Eibach Prokit
No rub, no fender mods

Looks nice!! I may go this route for my next setup (wheel/tire specs, not necessarily 57CRs). LOVE the neochrome Monoliths! Can't wait to move back to the PNW. I miss the roads. LV sucks for good back roads (unless you love straight ass roads).

 

[Firthy13]

Hi guys,
Looking at possibly doing a 19x10 +40 @ stock height.
Do you think I'll have any issues with clearance that requires fender mods. What size tyres would you recommend? I was hoping for a 265/35 but I think that might be pushing it. I just feel 255 is way too narrow for a 10in wide rim. Im not in to the stretched tyre look.

 

[BoostedDreams]

I have 18x9.5 +35 with 255/40 on OEM suspension. I want to run 265/35/18 and lower on swift. I bought eibach rear control arms. Will I need to pull alignment pin in front to make this setup work without rub? Was looking to get the falken 615 azenis.
@System Motorsports

 

[System Motorsports]

I have 18x9.5 +35 with 255/40 on OEM suspension. I want to run 265/35/18 and lower on swift. I bought eibach rear control arms. Will I need to pull alignment pin in front to make this setup work without rub? Was looking to get the falken 615 azenis.
@System Motorsports

18x9.5 +35 you will likely need to dial extra camber to not rub in the front on Swifts. Azenis tend to run a bit wide as well.

 

[Cody FKH8R]

Enkei TS-5: 18x9.5, +45
Nitto NT555 G2: 265/35R18
Swift Spec-R, 1.2” drop

 

[BoostedDreams]

18x9.5 +35 you will likely need to dial extra camber to not rub in the front on Swifts. Azenis tend to run a bit wide as well.

Pulling the guide pin will suffice?

 

[Eugene_Fk8]

Hi guys,
Looking at possibly doing a 19x10 +40 @ stock height.
Do you think I'll have any issues with clearance that requires fender mods. What size tyres would you recommend? I was hoping for a 265/35 but I think that might be pushing it. I just feel 255 is way too narrow for a 10in wide rim. Im not in to the stretched tyre look.

I just had a 19X10 +39 Ze40 with 265/35R19 DSW 06 plus on my car. No rubbing on -2.7F, -2R camber and stock height.

 

[BoostedDreams]

I just had a 19X10 +39 Ze40 with 265/35R19 DSW 06 plus on my car. No rubbing on -2.7F, -2R camber and stock height.

What are you doing for camber up front ?

 

[Eugene_Fk8]

What are you doing for camber up front ?

camber joint from hardrace or Evs or whiteline. They will give you camber adjustability for up to -4 degree.

 

[the_log_ride]

Damn, loving all the meaty fitments in this thread. Especially the Sagas. To me, they only look good face 5 with that concavity... ooh weee

Sponsored