Engine Shield/Cover Detached?

[ockc]

https://www.hondapartsnow.com/genuine/honda~cover~assy~eng~un~74110-tba-a00.html?Make=Honda&Model=Civic&Year=2016&Submodel=&Filter=(bt=4,3384;et=2,4)&Location=under-cover,3075587,6

is this the part that covers the engine? Need to replace mine but not sure what it's called.

Thanks!

Looks right for 4DR

Sponsored

 

[Dying2Live]

oil change is basic maintenance everyone should do themselves anyway, never have someone do what you can do yourself

 

[julianzh]

What are the harms if diving without the under cover? Mine's gone for some reason.

 

[latole]

What are the harms if diving without the under cover? Mine's gone for some reason.

Splash water on electronic ?
Car is more noisy ?
Fuel efficiency ?

 

[fjrman]

With the hood raised on my LX sedan I can look down and see the front two metal screws in the undercover.

Every time I raise the hood I check to see if the screws are still there and if they appear to be tight.

 

[surge83]

https://www.hondapartsnow.com/genuine/honda~cover~assy~eng~un~74110-tba-a00.html?Make=Honda&Model=Civic&Year=2016&Submodel=&Filter=(bt=4,3384;et=2,4)&Location=under-cover,3075587,6

Does this work for the 2017 HB??!?!

 

[ockc]

https://www.hondapartsnow.com/genui...ilter=(bt=3,501;et=2,4)&Location=pd:3077264,6

 

[remc86007]

Sorry to resurrect an old thread, but I thought I should post just in case others are experiencing this. I noticed after getting back from a trip to the Tail of the Dragon that my metal engine cover was hanging down just like OP's here. This happened 5k miles after I did the oil change myself and I'm sure I put the clips back in correctly. (the cover was fine before I left for the trip) Looking at the design of the clips, I don't understand how they are expected to stay in. Has anyone else had the clips fall out after hard driving? Would I be better off using zipties up front so this doesn't happen again?

 

[ockc]

Clips? There are 2 screws in the front.

 

[remc86007]

Clips? There are 2 screws in the front.

Right, I should have called it a screw or pin I guess. I think this is the part number: 90674-TY2-A01

https://www.bkhondaparts.com/oem-parts/honda-pin-engine-cover-90674ty2a01

 

[ockc]

No it is 2 Phillip screws that is not the right part.

 

[ockc]

https://www.civicx.com/threads/how-to-change-oil-on-2016-civic-1-5l-turbo.6919/page-3

 

[ockc]

 

[remc86007]

Thanks!

Sponsored