Engine mods for K20C2?

[Romeoridgee]

I tried to install a type r intake manifold on the c2, the shifter cable bracket on the transmission sits too high for the throttle body to bolt up. I had to modify the Im to fit such as the shaving the flange down to fit under the rail, and offset the outer bolt holes inward to just fit the studs. I’m going to get the Type r port injection spacer and see if that will work. The throttle body is definitely bigger. I think takes a half inch wider silicone coupler.

Sponsored

 

[Fallon99]

Does anyone know how the clutches have been holding up in the modded 2.0 models? Aem Intake rv6 catles dp and ktune will be installed on mine soon

 

[gtman]

I run the community tuning experience and reliability thread. As far as I know, there haven't really been any issues with the clutch. The KTuner tune is very mild.

Sponsored