Engine Cover Bolt Size?

[fiend busa]

Hey I lost one screw for the Red engine cover. Just wondering if anyone knows the size?

Sponsored

 

[GraphiteAZ]

Rock auto usually has a hardware section.

 

[fatherpain]

Doh, hate when that happens. Parts department at any Honda dealership should also have it.

Hey I lost one screw for the Red engine cover. Just wondering if anyone knows the size?

 

[saiko21]

Doh, hate when that happens. Parts department at any Honda dealership should have also have it.

Mostly size 10 bolt can get from home Depot or go to nearest dealer

 

[Patrick Bateman]

Mostly size 10 bolt can get from home Depot or go to nearest dealer

Fasteners are measured by the thread’s diameter.

In this case the bolt diameter is 6mm. The hex is 10mm. Not sure about the thread pitch.

 

[saiko21]

Fasteners are measured by the thread’s diameter.

In this case the bolt diameter is 6mm. The hex is 10mm. Not sure about the thread pitch.

Fasteners are measured by the thread’s diameter.

In this case the bolt diameter is 6mm. The hex is 10mm. Not sure about the thread pitch.

Yes, I am sorry I forgot to mention that. Long back I bought the same bolt for my Corolla to convert a plastic tab to bolt. I got it from home Depot. You can check the threads from other existing bolts

 

[fiend busa]

Yes, I am sorry I forgot to mention that. Long back I bought the same bolt for my Corolla to convert a plastic tab to bolt. I got it from home Depot. You can check the threads from other existing bolts

Thanks

I'm taking my car to dealership for few things so I might ask them as well

 

[Learn2turn]

(just take it off, it's only a heat blanket)

Sponsored