Electronic E-Brake issue after brake job

[RobGeeLau]

Thanks guys, beyond helpful. I'll update when I get this squared away

Sponsored

 

[latole]

The best way to reset is to remove the electric brake actuator and turn it clockwise (both brakes).
Look above the instructions how to do it (number 8)

Where do you see number 8 ?

 

[fitter_here]

Where do you see number 8 ?

I meant in this thread item 8 that I published above

 

[latole]

I meant in this thread item 8 that I published above

Ok thank you

 

[RobGeeLau]

I took it apart today to take a look at it, no loose wires!

On the passenger side (E) there are two wires white on top, and black on the bottom

Could it possibly be reversed on the driver side? Black on top and white on bottom??

Getting pretty frustrated-- I wish it was a simple hand brake!

 

[latole]

I took it apart today to take a look at it, no loose wires!

On the passenger side (E) there are two wires white on top, and black on the bottom

Could it possibly be reversed on the driver side? Black on top and white on bottom??

Getting pretty frustrated-- I wish it was a simple hand brake!

Can you reverse them ? I guess not , the connector must have a guide to avoid reversing the connection.

 

[RobGeeLau]

Can you reverse them ? I guess not , the connector must have a guide to avoid reversing the connection.

Oh what I meant was when I pulled the wires/connectors out of the harness maybe when I put them back into the harness I put them in the wrong way? I'll get some pictures soon

 

[Gamonal23]

PLEASE IN HAVING THE SAME EXACT EQUAL PROBLEM ! I did do my tears breaks and I pulled of the black and white wires now I’m having the same error even though I plugged them back on. The little
Motor sound for about 5 seconds and same problem just exact as you described please tell me what you did to fix it I’m still trying to get rid of it

 

[latole]

Too bad we never read the end of the story

 

[jred721]

I always find it annoying when people post threads about issues their having, they expect people to help them out, but then they dont even update their own thread with an end result. Seems inconsiderate as a lot of people might be having the same problem.

 

[latole]

Often read on too many forum, we never we read the end

 

[bobafettm]

Sounds like the identical issue on my Type R except I did not disconnect any of the wiring. I wonder if spinning the electronic parking brake actuator would work.

 

[latole]

Thanks guys, beyond helpful. I'll update when I get this squared away

What about a update ?

 

[shadow]

On page 6 of the PDF file attached in post #8 of this thread, under the Without Using the HDS, did you guys do step 2? It says turn vehicle to ON (but do not start).

 

[fitter_here]

On page 6 of the PDF file attached in post #8 of this thread, under the Without Using the HDS, did you guys do step 2? It says turn vehicle to ON (but do not start).

Yes, and fasten your seat belt

Sponsored