Eibach rear sway bar noise

[Ghosted]

Hi All,
I installed an Eibach rear sway bar and there is a clunky noise from the bar. I have greased it again and retighten but it is still noisy. Any other advise before removing it and putting back an OEM Si rear sway bar?

Thanks in advance.

Sponsored

 

[Gavin_Danitz]

what end links are you using?

 

[Vincent@27WON]

It's the endlinks. It always the endlinks.

 

[jack.]

I have a similar issue with my Whiteline 22 mm rear sway bar and whiteline end links, any ways to fix it?

 

[Ghosted]

what end links are you using?

Accord endlinks.

 

[Ghosted]

It's the endlinks. It always the endlinks.

Which one is recommended?

 

[Ducota]

I get a slight clunk on every vehicle with a RSB when I'm backing out of my driveway at almost full lock.
Just installed Whiteline end links (Thanks Vincent) on my WL RSB no more clunking.

 

[Los1391]

Part number: 52320-TLB-A00
Sold as 1 so you would need 2

 

[Ghosted]

Part number: 52320-TLB-A00
Sold as 1 so you would need 2

I’m currently using the accord endlinks

 

[pinhead66]

I have the eibach 22mm rsb with accord endlinks. I had the same clunking and just needed to torque down the endlinks really well. Wasn't able to get a torque wrench in there so just muscled it as much as i could.

 

[jscm]

I had spherical endlinks and they were a nightmare even if it was torqued down using impact. switched to accord endlinks and they still clunk once in a while even if its torqued using impact.

 

[Vincent@27WON]

I had spherical endlinks and they were a nightmare even if it was torqued down using impact. switched to accord endlinks and they still clunk once in a while even if its torqued using impact.

Yeah spherical work well for the purpose but are very loud. Best to save those for the track only.

 

[Ghosted]

I have the eibach 22mm rsb with accord endlinks. I had the same clunking and just needed to torque down the endlinks really well. Wasn't able to get a torque wrench in there so just muscled it as much as i could.

I believed I torque it down all the way the second time around. I’ll check if it got loose, but I don’t think it will go anymore. I also had the Allen wrench in the middle.

 

[Ghosted]

Can anyone recommend a brand that doesn’t make noises?

 

[Los1391]

@Unity Performance any idea of a recommendation? I know you guys typically test out all the products

Sponsored