bmcqueen22
Member
- Joined
- Jan 18, 2016
- Threads
- 1
- Messages
- 14
- Reaction score
- 0
- Location
- California
- Vehicle(s)
- Honda Civic Si
- Thread starter
- #1
I uploaded the preset stock +6psi on 02/03 with the engine completely stock. The car ran perfectly with no issues.
On 02/05 I installed a Weapon R SRI intake and uploaded the preset Injen SRI +6psi. the car ran perfectly for 2 days.
This morning I started the car and was driving for about 15 min. pulled off to a parking lot, left the car on 2 min later when I came back to the car, the CEL was on including about 10 other lights. (VSA error, parking brake error, hill start assist error, etc.)
I did a battery reset and let the car sit idle for about 5 min. Once I put in Drive and pulled off, all the lights came back on immediately.
Should I re-flash back to stock? I really don’t know what to do at this point.
On 02/05 I installed a Weapon R SRI intake and uploaded the preset Injen SRI +6psi. the car ran perfectly for 2 days.
This morning I started the car and was driving for about 15 min. pulled off to a parking lot, left the car on 2 min later when I came back to the car, the CEL was on including about 10 other lights. (VSA error, parking brake error, hill start assist error, etc.)
I did a battery reset and let the car sit idle for about 5 min. Once I put in Drive and pulled off, all the lights came back on immediately.
Should I re-flash back to stock? I really don’t know what to do at this point.
Sponsored