Does it fits?

[GoldClass]

Available Bolt Pattern: 5x114.3
Offset: + 22
Available Size: 18x9.5
Center bore: 73.1mm

As subject says, can this wheel size fit with stock suspension on Hatch? Anyone has installed? If yes, will it rub? Photos will be helpful. Thanks!

Sponsored

 

[Deezy]

You're probably going to have trouble with that one.
The center bore is off, so you will need centering rings to adapt to 64.1mm.
Also, that's a pretty good bit of offset on a 9.5 wheel. You might have some rubbing issues, but I've seen some people running a +22 offset in this thread... https://www.civicx.com/threads/aggressive-wheel-fitment-thread.26817/

 

[GoldClass]

Thanks for the advice.

Sponsored