DIY: Adding turn signal Lights to Si/EX side mirrors

raf702

Senior Member
First Name
Ralf
Joined
Aug 13, 2019
Messages
143
Reaction score
48
Location
SoCal
Car(s)
2016 Civic LX-P CVT
Country flag
I like those a lot actually. If I were to get them I’d only use the turn signal portion but I love the design.
These cap ones much better, just replace the original cap and wire up the leds. Definitely much easier install



Advertisement


 

98-0425

Senior Member
First Name
Nick
Joined
Jun 18, 2017
Messages
1,014
Reaction score
770
Location
Las Vegas
Car(s)
18 Civic Type-R #12307, 98 Integra Type-R #0425, 07 Pilot EX-L, 17 Pilot Elite
Country flag
Thank you for the write up. I just finished installing on my CTR. I used different part numbers for the mirror housings since I did not want the chrome nor do I have the lanewatch camera.
 

98-0425

Senior Member
First Name
Nick
Joined
Jun 18, 2017
Messages
1,014
Reaction score
770
Location
Las Vegas
Car(s)
18 Civic Type-R #12307, 98 Integra Type-R #0425, 07 Pilot EX-L, 17 Pilot Elite
Country flag
Another successful conversion on a buddy's car yesterday.

20200127_103919.jpg
 

17CivicTypeR_Brian

Aiming for 400whp out of the TypeR.
Joined
Oct 14, 2015
Messages
3,640
Reaction score
2,766
Location
York PA USA
Car(s)
'17 Black CTR #4071, 16 MDX Tech
Country flag
I still have two of the passenger side mirror housings in stock (from Europe) if anyone needs-
 

Hlee

Member
First Name
Harry Lee
Joined
May 3, 2020
Messages
17
Reaction score
1
Location
94536
Car(s)
2018 Civic si
Country flag
I went with the no chrome housings.

20190928_214054.jpg
Hi, I am new to the forum and was looking to add the Mugen turn signal mirror to my 2018 si. I noticed you installed to your Type R. Looks great. Can you share with me how you did the electrical install? Did you need to run wires, tap into existing turning signal electrical? I am lost. Can you help? Thanks
 

98-0425

Senior Member
First Name
Nick
Joined
Jun 18, 2017
Messages
1,014
Reaction score
770
Location
Las Vegas
Car(s)
18 Civic Type-R #12307, 98 Integra Type-R #0425, 07 Pilot EX-L, 17 Pilot Elite
Country flag
Hi, I am new to the forum and was looking to add the Mugen turn signal mirror to my 2018 si. I noticed you installed to your Type R. Looks great. Can you share with me how you did the electrical install? Did you need to run wires, tap into existing turning signal electrical? I am lost. Can you help? Thanks
@Hlee

Everything I needed to install the Mugen mirrors and the turn signal housings are contained in this thread and the following thread: https://www.civicx.com/forum/threads/mugen-hydrophilic-led-mirror-install.40579/#post-678940

For the turn signal positive wires, I ran it from the mirror to the fuse box via door grommet. Which wires you need to tap is also located in this thread. The ground wires, I tapped the black wire of the window switch.
 

Hlee

Member
First Name
Harry Lee
Joined
May 3, 2020
Messages
17
Reaction score
1
Location
94536
Car(s)
2018 Civic si
Country flag
@Hlee

Everything I needed to install the Mugen mirrors and the turn signal housings are contained in this thread and the following thread: https://www.civicx.com/forum/threads/mugen-hydrophilic-led-mirror-install.40579/#post-678940

For the turn signal positive wires, I ran it from the mirror to the fuse box via door grommet. Which wires you need to tap is also located in this thread. The ground wires, I tapped the black wire of the window switch.
Thanks for replying. I will give this a shot once I get the mirrors. The installation on the turn signal housing seems a little intimidating and I might pass on that one. The mod you did on your car looks fantastic. Just wish I had the patience and the know how like you to tackle the turn signal housing install though.
 

98-0425

Senior Member
First Name
Nick
Joined
Jun 18, 2017
Messages
1,014
Reaction score
770
Location
Las Vegas
Car(s)
18 Civic Type-R #12307, 98 Integra Type-R #0425, 07 Pilot EX-L, 17 Pilot Elite
Country flag
Thanks for replying. I will give this a shot once I get the mirrors. The installation on the turn signal housing seems a little intimidating and I might pass on that one. The mod you did on your car looks fantastic. Just wish I had the patience and the know how like you to tackle the turn signal housing install though.
Thank you. IMO, you should convert the housing at the same time. If you just install the mirror and run the wires, you still need to disassemble the mirror. Adding the housing and LED signal is just one small extra step that takes less than a minute, because you are essentially replacing the new housing upon reassembly.
 

Hlee

Member
First Name
Harry Lee
Joined
May 3, 2020
Messages
17
Reaction score
1
Location
94536
Car(s)
2018 Civic si
Country flag
Thank you. IMO, you should convert the housing at the same time. If you just install the mirror and run the wires, you still need to disassemble the mirror. Adding the housing and LED signal is just one small extra step that takes less than a minute, because you are essentially replacing the new housing upon reassembly.
You might have just talked me into it. Now, my si have a lane watch camera on the passenger mirror. Will that be an issue? Do know if the Touring model's right mirror come with lane watch camera and the led turn signal housing? I like to keep the lane watch camera feature and add the turn signal housing. Did you leave the heated mirror on your car unwired? My mistake asking about the timer module. I know these heated mirrors are controlled by some type of switch timer, but can't figure out how to wire it up. I have a Honda Pilot that has switch that turns on the heated mirror, but it shuts off after a certain amount of time.
 

98-0425

Senior Member
First Name
Nick
Joined
Jun 18, 2017
Messages
1,014
Reaction score
770
Location
Las Vegas
Car(s)
18 Civic Type-R #12307, 98 Integra Type-R #0425, 07 Pilot EX-L, 17 Pilot Elite
Country flag
You will need the following OE parts:

(QTY-1) 76205-TEC-Y11 (Right Housing)
(QTY-1) 76255-TEK-M01 (Left Housing)
(QTY-1) 34300-TBA-A01 (Right Turn Light Assembly)
(QTY-1) 34350-TBA-A01 (Left Turn Light Assembly)
(QTY-1) 76206-TBC-A11 (Right Wire Harness)
(QTY-1) 76256-TBC-A11 (Left Wire Harness)
(QTY-4) 90109-SAG-H01 (Tapping screw 4x14 truss)

Then follow the instructions in this thread. The first two part numbers are different from the original post because they do not have the chrome strip. If you want the chrome strip, use the part numbers in the original post. The right housing has the lane watch.
 

Hlee

Member
First Name
Harry Lee
Joined
May 3, 2020
Messages
17
Reaction score
1
Location
94536
Car(s)
2018 Civic si
Country flag
You will need the following OE parts:

(QTY-1) 76205-TEC-Y11 (Right Housing)
(QTY-1) 76255-TEK-M01 (Left Housing)
(QTY-1) 34300-TBA-A01 (Right Turn Light Assembly)
(QTY-1) 34350-TBA-A01 (Left Turn Light Assembly)
(QTY-1) 76206-TBC-A11 (Right Wire Harness)
(QTY-1) 76256-TBC-A11 (Left Wire Harness)
(QTY-4) 90109-SAG-H01 (Tapping screw 4x14 truss)

Then follow the instructions in this thread. The first two part numbers are different from the original post because they do not have the chrome strip. If you want the chrome strip, use the part numbers in the original post. The right housing has the lane watch.
That is awesome. Thanks for the list. Saves me some time. You have been a great help. Plan on ordering the Mugen mirrors directly for Japan.
 

                           





















































Top